Experimental and Finite Element Analysis of Butt Weld of Double-layer Steel Plates

被引：0
|
作者：
Zhonggen Xu
Xuan Guo
You Zhou
Changgen Deng
Guang Yang
机构：
[1] Guangzhou University,Dept. of Civil Engineering
[2] Tongji University,Dept. of Civil Engineering
来源：
KSCE Journal of Civil Engineering | 2022年 / 26卷
关键词：
Double-layer butt welded steel plate; Experiments; Butt-welding; Finite element; Bearing capacity; Stresses concentration;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper aims to study the weldability of butt weld of double-layer steel plates. Experiments for three groups of specimens subjected to various parameters are first conducted to obtain angular deformation, residual stress and temperature data. Then, 3-D finite element (FE) thermal simulation of butt welding is carried out to obtain the load-displacement curves under different included angles and weld length. Moreover, the butt welded steel plate welds were parametric analyzed for the stress concentration factor and the formula for the stress concentration factor was fitted according to the data. The analytical results have shown that double-layer butt welded steel plates with better performance compared to single-layer butt welded steel plates, and the proposed stress concentration factor formula predicts well and thus has certain reference value.
引用
收藏
页码：4628 / 4643
页数：15
相关论文
共 50 条
  • [31] PRELIMINARY ANALYSIS OF DOUBLE-LAYER STEEL GRIDS ERECTED BY PRESTRESSING.
    Racah, E.
    Vilnay, O.
    Ben-Arroyo, A.
    Bulletin of the International Association for Shell and Spatial Structures, 1979, 20-1 (69): : 17 - 24
  • [32] Non - Linear Finite Element Analysis of Mild Steel Gusset Plates
    Vivek, K. S.
    Priyanka, U. Kusuma Lakshmi
    Reddy, C. Ravi Kumar
    Ram, K. S. Sai
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3726 - 3732
  • [33] Finite Element Analysis of Weld Nugget Formation in Weld-Bonding of Three Stacks of Steel Sheets
    Shen J.
    Zhang Y.
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2019, 53 (06): : 726 - 733
  • [34] Analysis of double layer plates on inhomogenous elastic foundation by finite element method and investigation of some parameters behavior
    Li, Ren-Ge
    Zheng, Xiao-Ping
    Li, Zi-Feng
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2006, 27 (03): : 432 - 435
  • [35] Simulation of nanoindentation experiments of single-layer and double-layer thin films using finite element method
    Mocko, W.
    Szymanska, M.
    Smietana, M.
    Kalisz, M.
    SURFACE AND INTERFACE ANALYSIS, 2014, 46 (10-11) : 1071 - 1076
  • [36] Semi-analytical Finite Element Study of the Slot Leakage Inductance of Double-Layer Windings
    Bailey, L.
    Jara, W.
    Madariaga, C.
    Riedemann, J.
    Tapia, J.
    Bramerdorfer, G.
    Cavagnino, A.
    2020 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), VOL 1, 2020, : 326 - 331
  • [37] Finite element analysis and experimental investigation of moving heat source model for GMAW deposited mild steel weld bead
    Aslam, Mohd
    Sahoo, Chinmaya Kumar
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (05) : 2218 - 2228
  • [38] Finite Element Analysis of Heat Input Effect on Temperature, Residual Stresses and Distortion in Butt Welded Plates
    Venkatkumar, D.
    Ravindran, D.
    Selvakumar, G.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 8328 - 8337
  • [39] An experimental and numerical analysis of the thermal performance of double-layer Trombe walls
    Ma, Qingsong
    Wang, Xin
    Chen, Xiaofei
    Fukuda, Hiroatsu
    Gao, Weijun
    Wei, Xindong
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2021,
  • [40] Experimental and Numerical Analysis for Eccentricity Solution in Double-Layer Space Truss
    Vital, Welington
    Silva, Ramon
    Bezerra, Luciano M.
    Oliveira, Cynthia M.
    Freitas, Cleirton A. S.
    Bonilla, Jorge
    BUILDINGS, 2024, 14 (03)
12345