Effect of Cryogenic Treatment on Microstructure and Properties of CuBe2

被引：15

作者：

Pervaz Ahmed M. ^{[1
]}

Siddhi Jailani H. ^{[1
]}

Rasool Mohideen S. ^{[1
]}

Rajadurai A. ^{[2
]}

机构：

[1] Department of Mechanical Engineering, B S Abdur Rahman University, Chennai

[2] Department of Production Technology, MIT Campus, Anna University, Chennai

来源：

Metallography, Microstructure, and Analysis | 2016年 / 5卷 / 06期

基金：

英国科研创新办公室;

关键词：

Copper beryllium alloy; Cryogenic treatment; DSC; Microstructure; Tensile strength;

D O I：

10.1007/s13632-016-0314-9

中图分类号：

学科分类号：

摘要：

Cryogenic treatment is being extensively used in many industries for enhancing the properties of materials. Although the effect of cryogenic treatment on the properties of ferrous materials has been well documented, its effect on non-ferrous alloys has not been fully understood. In this study, the influence of extensive cryogenic treatment and mild cryogenic treatment on the properties of copper beryllium alloy has been investigated. Microstructure analysis was carried out using optical microscope and scanning electron microscope studies. Differential scanning calorimeter analysis was conducted to study the effect of cryogenic treatment on phase transformation of the samples. XRD analysis was performed to identify the possible phases. Several properties such as tensile strength, hardness, and electrical resistivity were measured. Microstructure analysis revealed that the grains of cryogenic treated sample are smaller than that of as-received samples and the dispersion of beryllide particles in the α-copper matrix after cryogenic treatment was found to be increased. Differential scanning calorimeter analysis indicated that there was a reduction in phase transformation duration due to cryogenic treatment. Tensile strength and hardness were improved by the cryogenic treatment. In addition, a decrease in the electrical resistivity was observed after cryogenic treatment. © 2016, Springer Science+Business Media New York and ASM International.

引用

页码：528 / 535

页数：7

共 31 条

[1]

Gill S.S., Singh J., Singh R., Singh H., Metallurgical principles of cryogenically treated tool steels—a review on the current state of science, Int. J. Adv. Manuf. Technol., 54, 1, pp. 59-82, (2011)

[2]

Kalia S., Cryogenic processing: a study of materials at low temperatures, J. Low Temp. Phys., 158, 5, pp. 934-945, (2010)

[3]

Kalsi N.S., Sehgal R., Sharma V.S., Cryogenic treatment of tool materials: a review, Mater. Manuf. Process., 25, 1, pp. 1077-1100, (2010)

[4]

Collins D.N., Deep cryogenic treatment of tool steels—a review, Heat Treat. Met., 23, 2, (1996)

[5]

Preciado M., Pellizzari M., Influence of deep cryogenic treatment on the thermal decomposition of Fe–C martensite, J. Mater. Sci., 49, 23, pp. 8183-8191, (2014)

[6]

Gogte C.L., Likhite A., Peshwe D., Bhokarikar A., Shetty R., Effect of cryogenic processing on surface roughness of age hardenable AA6061 alloy, Mater. Manuf. Process., 29, 6, pp. 710-714, (2014)

[7]

Li C., Cheng N., Chen Z., Guo N., Zeng S., Deep cryogenic treatment induced phase transformation in the Al–Zn–Mg–Cu alloy, Int. J. Miner. Met. Mater., 22, 1, pp. 67-77, (2015)

[8]

Xiong C.-X., Zhang X.-M., Deng Y.-L., Xiao Y., Deng Z.-Z., Chen B.-X., Effects of cryogenic treatment on mechanical properties of extruded Mg–Gd–Y–Zr(Mn) alloys, J. Cent. South Univ. Technol., 14, 3, pp. 305-309, (2007)

[9]

Chao Y., Wang Y., Sang D., Li Y., Jing L., Fu R., Zhang X., Effects of deep cryogenic treatment on the microstructure and mechanical properties of commercial pure zirconium, J. Alloys Compd., 619, pp. 513-519, (2015)

[10]

Jafferson J.M., Hariharan P., Machining performance of cryogenically treated electrodes in microelectric discharge machining: a comparative experimental study, Mater. Manuf. Process., 28, 4, pp. 397-402, (2013)

← 1 2 3 4 →