Life cycle assessment of a hot-pressing machine to manufacture particleboards: hotspots, environmental indicators, and solutions

[1] Araujo JB(2012)Towards a balanced scoreboard for assessing manufacturing processes sustainability Int J Bus Perform Manag 13 198-221

[2] Oliveira JFG(2013)Sustainability of abrasive processes CIRP Ann Manuf Technol 62 653-672

[3] Aurich JC(2015)A combination of material flow cost accounting and design of experiments techniques in an SME: the case of a wood products manufacturing company in northern Thailand J Clean Prod 108 1352-1364

[4] Linke B(2018)Environmental aspects of oriented strand boards production. A Brazilian case study J Clean Prod 183 710-719

[5] Hauschild M(2018)Environmental life cycle assessment of industrial pine roundwood production in Brazilian forests Sci Total Environ 640-641 599-608

[6] Carrella M(2014)Dynamic system for life cycle inventory and impact assessment of manufacturing processes Proc CIRP 15 531-536

[7] Kirsch B(2017)Productive and environmental performance indicators analysis by a combined LCA hybrid model and real-time manufacturing process monitoring: a grinding unit process application J Clean Prod 161 510-523

[8] Chompu-inwai FS(1996)Lean and green: the move to environmentally conscious manufacturing Calif Manag Rev 39 80-105

[9] Ferro DAL(2014)Carbon footprint of particleboard: a comparison between ISO/TS 14067, GHG Protocol, PAS 2050 and Climate Declaration J Clean Prod 66 199-209

[10] Silva M(2012)Sustainable manufacturing: trends and research challenges Prod Plan Control 23 83-104

[1] Araujo JB(2012)Towards a balanced scoreboard for assessing manufacturing processes sustainability Int J Bus Perform Manag 13 198-221

[2] Oliveira JFG(2013)Sustainability of abrasive processes CIRP Ann Manuf Technol 62 653-672

[3] Aurich JC(2015)A combination of material flow cost accounting and design of experiments techniques in an SME: the case of a wood products manufacturing company in northern Thailand J Clean Prod 108 1352-1364

[4] Linke B(2018)Environmental aspects of oriented strand boards production. A Brazilian case study J Clean Prod 183 710-719

[5] Hauschild M(2018)Environmental life cycle assessment of industrial pine roundwood production in Brazilian forests Sci Total Environ 640-641 599-608

[6] Carrella M(2014)Dynamic system for life cycle inventory and impact assessment of manufacturing processes Proc CIRP 15 531-536

[7] Kirsch B(2017)Productive and environmental performance indicators analysis by a combined LCA hybrid model and real-time manufacturing process monitoring: a grinding unit process application J Clean Prod 161 510-523

[8] Chompu-inwai FS(1996)Lean and green: the move to environmentally conscious manufacturing Calif Manag Rev 39 80-105

[9] Ferro DAL(2014)Carbon footprint of particleboard: a comparison between ISO/TS 14067, GHG Protocol, PAS 2050 and Climate Declaration J Clean Prod 66 199-209

[10] Silva M(2012)Sustainable manufacturing: trends and research challenges Prod Plan Control 23 83-104