Influence of Fly Ash Particles on Machining Characteristics of AA6061 Aluminum Matrix Composites Produced Using Semisolid Slurry Casting

被引：0
作者：
Isaac Dinaharan
Jebaraj David Raja Selvam
Jerin Jose
Ramaswamy Palanivel
机构：
[1] University of Johannesburg,Department of Mechanical Engineering Science
[2] Auckland Park Kingsway Campus,Department of Mechanical Engineering
[3] Karunya Institute of Technology and Sciences,Department of Mechanical Engineering, College of Engineering
[4] Shaqra University,undefined
来源：
Transactions of the Indian Institute of Metals | 2023年 / 76卷
关键词：
Aluminum matrix composites; Fly ash; Turning; Cutting force;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Fly ash particles were reinforced into AA6061 aluminum in semisolid state to produce aluminum matrix composites (AMCs). The prepared AMCs were subjected to turning operation using a tool made of polycrystalline diamond. Fly ash particles were spread across the aluminum matrix in homogenous manner. The incorporation of fly ash particle had a remarkable effect on the turning operation. Fly ash particles brought down the demand on the cutting force but deteriorated the surface finish. The content of fly ash particles determined the formation of built up edge, size of chips formed and the features on the machined surface.
引用
收藏
页码：1447 / 1452
页数：5
相关论文
共 66 条
[1]  
Olusesi OS(2021)undefined Manuf Lett 29 34-undefined
[2]  
Udoye NE(2017)undefined Communications 6 6-undefined
[3]  
Garg MP(2020)undefined Mater Sci Eng A 772 138823-undefined
[4]  
Sharma A(2016)undefined Crit Rev Environ Sci Technol 46 143-undefined
[5]  
GovindaRao R(2008)undefined Mater Sci Eng A 480 117-undefined
[6]  
Ghosh M(2015)undefined Mater Manuf Process 30 1442-undefined
[7]  
Ganguly RI(2019)undefined Int J Adv Manuf Technol 100 2929-undefined
[8]  
Bose SC(2020)undefined Compos Commun 22 100504-undefined
[9]  
Sahoo KL(2019)undefined Int J Mach Tools Manuf 143 63-undefined
[10]  
Bahrami A(2008)undefined Int J Mach Tools Manuf 48 1613-undefined
1234567