Plant-wide supply-demand forecast and optimization of byproduct gas system in steel plant

被引：0

作者：

Sun W.-Q. ^{[1
]}

Cai J.-J. ^{[1
]}

Song J. ^{[2
]}

机构：

[1] State Environmental Protection Key Laboratory of Eco-Industry, Institute of Thermal and Environmental Engineering, Northeastern University, Shenyang 110819, Liaoning

[2] School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, Henan

来源：

Journal of Iron and Steel Research International | 2013年 / 20卷 / 9期

关键词：

Byproduct gas; Dynamic programming method; Supply-demand forecast; Surplus gas;

D O I：

10.1016/S1006-706X(13)60148-X

中图分类号：

学科分类号：

摘要：

Considerable energy is consumed during steel manufacturing process. Byproduct gas emerges as secondary energy in the process; however, it is also an atmospheric pollution source if it is reteased into the air. Therefore, the optimal utilization of byproduct gas not only saves energy but also protects environment. To solve this issue, a forecast model of gas supply, gas demand and surplus gas in a steel plant was proposed. With the progress of energy conservation, the amount of surplus gas was very large. In a steel plant, the surplus gas was usually sent to boilers to generate steam. However, each boiler had an individual efficiency. So the optimization of the utilization of surplus gas in boilers was a key topic A dynamic programming method was used to develop an optimal utilization strategy for surplus gas. Finally, a case study providing a sound confirmation was given. © 2013 Central Iron and Steel Research Institute.

引用

页码：1 / 7

页数：6

共 18 条

[1]

Kim J.H., Yi H.S., Han C., A Novel MILP Model for Plantwide Multiperiod Optimization of Byproduct Gas Supply System in the Iron- and Steel-Making Process [J], Trans IChemE, 81, 8, (2003)

[2]

Zhang X.P., Zhao J., Wang W., Et al., An Optimal Method for Prediction and Adjustment on Byproduct Gas Holder in Steel Industry [J], Expert Systems With Applications, 38, 4, (2011)

[3]

Kong H.N., Qi E.S., Li H., Et al., An MILP for Optimization of Byproduct Gases in the Integrated Iron and Steel Plant [J], Applied Energy, 87, 7, (2010)

[4]

Kong H.N., Qi E.S., He S.G., Et al., MILP Model for Plant-Wide Optimal By-Product Gas Scheduling in Iron and Steel Industry [J], Journal of Iron and Steel Research, International, 17, 7, (2010)

[5]

Mcculloch G.A., Bandyopadhyay R., Application of Operational Research in Production Problems in the Steel Industry [J], International Journal of Production Research, 10, 1, (1972)

[6]

Production and Technology of Iron and Steel in Japan During 2009 [J], ISIJ International, 50, 6, (2010)

[7]

Chan D.Y.L., Yang K.H., Lee J.D., Et al., The Case Study of Furnace Use and Energy Conservation in Iron and Steel Industry [J], Energy, 35, 4, (2010)

[8]

Matsuda K., Tanaka S., Endou M., Et al., Energy Saving Study on a Large Steel Plant by Total Site Based Pinch Technology [J], Applied Thermal Engineering, 43, (2012)

[9]

Zhang J.L., Wang G.S., Energy Saving Technologies and Productive Efficiency in the Chinese Iron and Steel Sector [J], Energy, 33, 4, (2008)

[10]

Sun W.-Q., Cai J.-J., DU T., Et al., Specific Energy Consumption Analysis Model and Its Application in Typical Steel Manufacturing Process [J], Journal of Iron and Steel Research, International, 17, 10, (2010)

← 1 2 →