High-cycle fatigue life extension of glass fiber/polymer composites with carbon nanotubes

被引:0
|
作者
Christopher S. Grimmer
C. K. H. Dharan
机构
[1] University of California,Berkeley Composites Laboratory
来源
Journal of Wuhan University of Technology-Mater. Sci. Ed. | 2009年 / 24卷
关键词
glass fiber; composites; carbon nanotubes; fatigue; strain energy;
D O I
暂无
中图分类号
学科分类号
摘要
The present work shows that the addition of small volume fractions of multi-walled carbon nanotubes (CNTs) to the matrix results in a significant increase in the high-cycle fatigue life. It is proposed that carbon nanotubes tend to inhibit the formation of large cracks by nucleating nano-scale damage zones. In addition, the contribution to energy absorption from the fracture of nanotubes bridging across nano-scale cracks and from nanotube pull-out from the matrix are mechanisms that can improve the fatigue life. An energy-based model was proposed to estimate the additional strain energy absorbed in fatigue. The distributed nanotubes in the matrix appear to both distribute damage as well as inhibit damage propagation resulting in an overall improvement in the fatigue strength of glass fiber composites.
引用
收藏
页码:167 / 173
页数:6
相关论文
共 50 条
  • [31] High-cycle fatigue of notched plain concrete
    Susmel, Luca
    XV PORTUGUESE CONFERENCE ON FRACTURE, PCF 2016, 2016, 1 : 2 - 9
  • [32] A Brief Review of Multiaxial High-Cycle Fatigue
    Xiangqun Ding
    Guoqiu He
    Chengshu Chen
    Zhengyu Zhu
    Xiaoshan Liu
    Paul N. Crepeau
    Metallurgical and Materials Transactions B, 2007, 38 : 591 - 599
  • [33] Effect of Using Carbon Nanotubes on ILSS of Glass Fiber-Reinforced Polymer Laminates
    S. K. Chaudhary
    K. K. Singh
    R. Venugopal
    Transactions of the Indian Institute of Metals, 2018, 71 : 3029 - 3036
  • [34] Residual strength of GFRP at high-cycle fatigue
    J. Andersons
    J. Korsgaard
    Mechanics of Composite Materials, 1999, 35 : 395 - 402
  • [35] Improving shear strength of bolted joints in pultruded glass fiber reinforced polymer composites using carbon nanotubes
    Genedy, Moneeb
    Chennareddy, Rahulreddy
    Soliman, Eslam M.
    Kandil, Usama F.
    Taha, Mahmoud M. Reda
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2017, 36 (13) : 958 - 971
  • [36] Residual strength of GFRP at high-cycle fatigue
    Andersons, J
    Korsgaard, J
    MECHANICS OF COMPOSITE MATERIALS, 1999, 35 (05) : 395 - 402
  • [37] Low-Cycle Thermal Fatigue and High-Cycle Vibration Fatigue Life Estimation of a Diesel Engine Exhaust Manifold
    Sissa, Simone
    Giacopini, Matteo
    Rosi, Roberto
    XVII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM17), 2014, 74 : 105 - 112
  • [38] Glass Fiber Hybrid Composites Molded by RTM Using a Dispersion of Carbon Nanotubes/Clay in Epoxy
    Sene, Tarcisio S.
    da Silva, Lais V.
    Amico, Sandro C.
    Becker, Daniela
    Manzano Ramirez, Alejandro
    Coelho, Luiz A. F.
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2013, 16 (05): : 1128 - 1133
  • [39] Effects of carbon nanotubes on open-hole carbon fiber reinforced polymer composites
    Han, Kang-ning
    Zhou, Wei
    Qin, Reng
    Wang, Guang-fei
    Ma, Lian-Hua
    MATERIALS TODAY COMMUNICATIONS, 2020, 24 (24)
  • [40] Effect of carbon nanotubes on friction and wear properties of glass fiber/epoxy composites
    Wang, Yongkun
    Xu, Zhiwei
    Chen, Li
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4, 2011, 44-47 : 2181 - +