Abrasive and fretting wear resistance of aluminum alloy specimens manufactured by laser microcladding

被引：0

作者：

T. V. Tarasova

G. O. Gvozdeva

机构：

[1] Moscow State Technological University STANKIN,

来源：

Journal of Friction and Wear | 2017年 / 38卷

关键词：

laser microcladding; aluminum alloy; Al–Si alloy; abrasive wear; fretting;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

In this article, the results of investigations of abrasive wear resistance and wear under the fretting of the samples obtained by the method of laser microcladding have been presented. The material for sample preparation was powder of Al–Si hypereutectic alloy with the following composition: 70–74 wt % Al and 26–30 wt % Si. The influence of the structure and phase composition of AlSi30 alloy on wear resistance under the conditions of abrasive wear and wear under fretting conditions has been shown.

引用

页码：231 / 236

页数：5

共 50 条

[31] Prediction and optimization of wear resistance of friction stir welded dissimilar aluminum alloy [J].

Palanivel, R. ;

Mathews, P. Koshy ;

Murugan, N. ;

Dinaharan, I. .

INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 :578-584

[32] Improvement of wear and corrosion resistance of aluminum alloy weld by constructing a laminate microstructure [J].

Chen, Qihao ;

Ying, Yuefeng ;

Hu, Mingzhu ;

Dong, Bolun ;

Lin, Sanbao ;

Fan, Yangyang ;

Cai, Xiaoyu ;

Jin, Tong .

SURFACES AND INTERFACES, 2025, 65

[33] COMPARISON OF ABRASIVE WEAR RESISTANCE BETWEEN HVOF THERMALLY SPRAYED ALLOY-BASED AND CERMET COATINGS [J].

Cesanek, Zdenek ;

Houdkova, Sarka ;

Schubert, Jan ;

Kasparova, Michaela .

METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2013, :1039-1044

[34] The life prediction of notched aluminum alloy specimens after laser shock peening by TCD [J].

Li, Piao ;

Susmel, Luca ;

Ma, Mingze .

INTERNATIONAL JOURNAL OF FATIGUE, 2023, 176

[35] Abrasive wear property of laser melting/deposited Ti2Ni/TiNi intermetallic alloy [J].

Fei, Gao ;

Hua-Ming, Wang .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 (06) :1358-1362

[36] The effects of ultrasonic nanocrystal surface modification temperature on the mechanical properties and fretting wear resistance of Inconel 690 alloy [J].

Amanov, A. ;

Umarov, R. .

APPLIED SURFACE SCIENCE, 2018, 441 :515-529

[37] Effect of Shot and Laser Peening on Fatigue Strength of Additively Manufactured Aluminum Alloy with Rough Surfaces [J].

Misato Nakamura ;

Koji Takahashi ;

Yuta Saito .

Journal of Materials Engineering and Performance, 2023, 32 :1589-1600

[38] Precision and performance of aluminum alloy rod of lattice manufactured by laser wire arc additive manufacturing [J].

Zheng B. ;

Yu S. ;

Tang L. ;

Shi Y. .

Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2022, 50 (12) :49-57

[39] Effect of Shot and Laser Peening on Fatigue Strength of Additively Manufactured Aluminum Alloy with Rough Surfaces [J].

Nakamura, Misato ;

Takahashi, Koji ;

Saito, Yuta .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (04) :1589-1600

[40] Influence Mechanism of In-situ Particles on Microstructure and Wear Resistance of 6063 Aluminum Alloy [J].

Zheng Chong ;

Liu Hiumin ;

Lv Chunda ;

Liu Juncheng ;

Shi Zhiming .

RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (11) :4213-4218

← 1 2 3 4 5 →