Abrasive and fretting wear resistance of aluminum alloy specimens manufactured by laser microcladding

被引：0
作者：
T. V. Tarasova
G. O. Gvozdeva
机构：
[1] Moscow State Technological University STANKIN,
来源：
Journal of Friction and Wear | 2017年 / 38卷
关键词：
laser microcladding; aluminum alloy; Al–Si alloy; abrasive wear; fretting;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this article, the results of investigations of abrasive wear resistance and wear under the fretting of the samples obtained by the method of laser microcladding have been presented. The material for sample preparation was powder of Al–Si hypereutectic alloy with the following composition: 70–74 wt % Al and 26–30 wt % Si. The influence of the structure and phase composition of AlSi30 alloy on wear resistance under the conditions of abrasive wear and wear under fretting conditions has been shown.
引用
收藏
页码：231 / 236
页数：5
相关论文
共 50 条
  • [1] Abrasive and fretting wear resistance of aluminum alloy specimens manufactured by laser microcladding
    Tarasova, T. V.
    Gvozdeva, G. O.
    JOURNAL OF FRICTION AND WEAR, 2017, 38 (03) : 231 - 236
  • [2] Fretting wear resistance of aluminum alloy specimens manufactured by laser microcladding
    Tarasova, Tatyana V.
    Gvozdeva, Galina O.
    MECHANICS & INDUSTRY, 2016, 17 (07)
  • [3] Abrasive and fretting wear resistance of refractory cobalt alloy specimens manufactured by the method of selective laser melting
    Tarasova, T. V.
    Nazarov, A. P.
    Shalapko, Yu. I.
    JOURNAL OF FRICTION AND WEAR, 2014, 35 (05) : 365 - 373
  • [4] Abrasive and fretting wear resistance of refractory cobalt alloy specimens manufactured by the method of selective laser melting
    T. V. Tarasova
    A. P. Nazarov
    Yu. I. Shalapko
    Journal of Friction and Wear, 2014, 35 : 365 - 373
  • [5] Composite fretting wear of aluminum alloy
    Zhu, Min-Hao
    Zhou, Zhong-Rong
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 868 - +
  • [6] Laser alloying of aluminum alloy AA 6061 with Ni and Cr. Part II. The effect of laser alloying on the fretting wear resistance
    Fu, YQ
    Batchelor, AW
    SURFACE & COATINGS TECHNOLOGY, 1998, 102 (1-2) : 119 - 126
  • [7] Surface modification of aluminum alloy to improve fretting wear properties
    Nimura, Kenji
    Sugawara, Takashi
    Jibiki, Tatsuhiro
    Ito, Satoshi
    Shima, Masayuki
    TRIBOLOGY INTERNATIONAL, 2016, 93 : 702 - 708
  • [8] Fretting wear behavior of a SiC particle reinforced aluminum alloy composite
    Kurita, H
    Yamagata, H
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 1997, 42 (06) : 477 - 484
  • [9] Abrasive wear and aluminum sticking resistance of steel matrix composites
    Lou, D. C.
    Solberg, J. K.
    Akselsen, O. M.
    Dahl, N.
    ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, 2007, 334-335 : 21 - +
  • [10] Abrasive wear resistance of aluminium alloy ceramic particulate composites
    GarciaCordovilla, C
    Narciso, J
    Louis, E
    WEAR, 1996, 192 (1-2) : 170 - 177
12345