Effect of Carbon Nanotubes as Reinforcement on the Mechanical Properties of Aluminum-Copper-Magnesium Alloy

被引：0
作者：
N. S. Anas
R. K. Dash
Tata N. Rao
R. Vijay
机构：
[1] International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI),School of Engineering Sciences and Technology
[2] University of Hyderabad,undefined
来源：
Journal of Materials Engineering and Performance | 2017年 / 26卷
关键词：
Al-Cu-Mg alloy; carbon nanotubes; composites; mechanical properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Elemental powders of Al, Cu, Mg and x wt.% CNT (x: 0-2.5) were blended and milled in the high-energy ball mill for 4 h. Milled powders of Al alloy-CNT composites were subsequently consolidated by upset forging followed by hot extrusion. Even though the particle size of milled powders of Al alloy-CNT composites decreased with the addition of CNT, there is no significant effect on crystallite size. Raman spectra indicated that the nanocrystalline structure of CNT is retained after milling. Yield and ultimate tensile strengths increased with CNT content and Al alloy-2.5 wt.% CNT exhibited an enhancement of 56 and 73%, respectively, when compared to Al alloy in solutionized condition. The improvement in mechanical properties of Al alloy-CNT composites is due to ultra-fine grain size, finer second-phase precipitates and uniform dispersion of CNT.
引用
收藏
页码：3376 / 3386
页数：10
相关论文
共 133 条
[1]  
Rawal S(2001)Metal-matrix Composites for Space Applications JOM 53 14-17
[2]  
Kelly A(2006)Composite Materials After Seventy Years J. Mater. Sci. 41 905-912
[3]  
Shelley JS(2001)Metal-matrix Composites for Liquid Rocket Engines JOM 53 18-21
[4]  
LeClaire R(1991)Helical Microtubules of Graphitic Carbon Nature 354 56-58
[5]  
Nichols J(1996)Exceptionally High Young’s Modulus Observed for Individual Carbon Nanotubes Nature 381 678-680
[6]  
Iijima S(2010)Carbon Nanotube Reinforced Metal Matrix Composites—A Review Int. Mater. Rev. 55 41-64
[7]  
Treacy MMJ(2008)Carbon Nanotube-Reinforced Aluminum Strips Compos. Sci. Technol. 68 486-492
[8]  
Ebbesen TW(2009)Microstructural and Mechanical Characterization of Al–MWCNT Composites Produced by Mechanical Milling Mater. Sci. Eng., A 502 159-163
[9]  
Gibson JM(2009)Combination of Hot Extrusion and Spark Plasma Sintering for Producing Carbon Nanotube Reinforced Aluminum Matrix Composites Carbon 47 570-577
[10]  
Bakshi SR(2010)Effect of Carbon nanotube (CNT) Content on the Mechanical Properties of CNT- Reinforced Aluminum Composites Compos. Sci. Technol. 70 2237-2241
12345678910