Analysis of Corrugated Sheet Using FEM

被引：0
作者：
Pal P. [1 ]
机构：
[1] Department of Civil Engineering, Motilal Nehru National Institute of Technology Allahabad, Prayagraj
来源：
Journal of The Institution of Engineers (India): Series A | 2021年 / 102卷 / 01期
关键词：
Corrugated sheet; Deflection; FEM; Frequency; Trapezoidal section;
D O I：
10.1007/s40030-020-00502-z
中图分类号：
学科分类号：
摘要：
This study determines the optimal sectional properties of a galvanized iron corrugated sheet using the finite element method. The findings are established based on the results of the deflection and natural frequencies of the sheet. The investigation is carried out through a parametric study by varying its thickness, width of the horizontal flange, angle of corrugation and aspect ratio, keeping a constant sectional area. The bottom flange of the sheet is assumed to be fixed. The sheet is subjected to a uniformly distributed transverse load. Several interesting findings are observed in which the study provides an effective corrugated sheet with varying sectional properties. The corrugated sheet’s optimal thickness is obtained as 1.5 mm, and the effective angle of corrugation is 60°. The present study may be useful to the designers in the industries for analysing and designing the trapezoidal corrugated sheets. © 2021, The Institution of Engineers (India).
引用
收藏
页码：33 / 41
页数：8
相关论文
共 10 条
  • [1] Liu W.H., Huang C.C., Vibration analysis of folded plates, J. Sound Vib., (1992)
  • [2] Samanta A., Mukhopadhyay M., Finite element static and dynamic analyses of folded plates, Eng. Struct., (1999)
  • [3] Peng L.X., Liew K.M., Kitipornchai S., Analysis of stiffened corrugated plates based on the FSDT via the mesh-free method, Int. J. Mech. Sci., (2007)
  • [4] Karthi L., Nandakumar C.G., Investigations on elastic behaviour of corrugated plates, Int. J. Sci. Eng. Res., 4, 5, pp. 127-130, (2013)
  • [5] Wannberg D., Wennhage P., Stichel S., Orthotropic models of corrugated sheets in finite element analysis, ISRN Mech. Eng., (2011)
  • [6] Mohammadi H., Ziaei-Rad S., Dayyani I., An equivalent model for trapezoidal corrugated cores based on homogenization method, Compos. Struct., (2015)
  • [7] Dou C., Jiang Z.Q., Pi Y.L., Guo Y.L., Elastic shear buckling of sinusoidally corrugated steel plate shear wall, Eng. Struct., (2016)
  • [8] Wang C., Khodaparast H.H., Friswell M.I., Shaw A.D., An equivalent model of corrugated panels with axial and bending Coupling, Comput. Struct., (2017)
  • [9] Galvanized Steel Sheets (Plain and Corrugated)—Specification, (2003)
  • [10] Cold Reduced Low Carbon Steel Sheet and Strip, (2008)
1