Formation and thermal stability of calcium silicate hydrate substituted with Al3+ ions in the mixtures with CaO/SiO2 = 1.5

被引:0
作者
T. Dambrauskas
K. Baltakys
A. Eisinas
机构
[1] Kaunas University of Technology,Department of Silicate Technology
来源
Journal of Thermal Analysis and Calorimetry | 2018年 / 131卷
关键词
Calcium silicate hydrate (CSH); Hydrothermal synthesis; Thermal stability; Thermodynamics;
D O I
暂无
中图分类号
学科分类号
摘要
The influence of aluminum additive on the formation mechanism and thermal stability of calcium silicate hydrates was determined. Calcium silicates hydrates were synthesized in the primary mixtures with the molar ratios of CaO/(SiO2 + Al2O3) = 1.5 and Al2O3/(SiO2 + Al2O3) = 0.025 or 0.05. The hydrothermal synthesis has been carried out in unstirred suspensions under saturated steam pressure in argon atmosphere at 200 °C temperature for 4, 8, 16, 24, 48 and 72 h by applying extra argon gas (10 bar). It was determined that Al2O3 additives have a significant influence on the formation mechanism of synthesis products as well as their stability during the isothermal curing. At the beginning of the reaction, this additive retarded the formation of calcium silicate hydrates but stimulated the crystallization of CASH and C2S which remained stable under all experimental conditions. The thermodynamic calculations, in the mixtures with Al2O3/(SiO2 + Al2O3) = 0.025 molar ratio, showed that the greatest possibility that C-S-H(I) and C2S with incorporated Al3+ ions in the structure will crystallize, because the obtained Gibbs free energy value is the lowest (ΔrGT0\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta_{\rm r} G_{\rm T}^{0}$$\end{document} = −80.3 kJ and ΔrGT0\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\Delta_{\rm r} G_{\rm T}^{0}$$\end{document} = −104.5 kJ). Meanwhile, in the mixtures with larger amount of aluminum, there is the greatest possibility that 4CaO·Al2O3·9.5H2O and 4CaO·Al2O3·6.5H2O will be formed. The obtained results were confirmed by the thermodynamic calculations and instrumental analysis data.
引用
收藏
页码:501 / 512
页数:11
相关论文
共 128 条
[1]  
Abdul-Wahab SA(2016)Impact of the addition of oil-based mud on carbon dioxide emissions in a cement plant J Clean Prod 112 4214-4225
[2]  
Al-Rawas GA(2014)Comparing study on hydration properties of various cementitious systems J Therm Anal Calorim 118 1483-1492
[3]  
Ali S(2015)A review of alternative approaches to the reduction of CO Cem Concr Res 78 126-142
[4]  
Al-Dhamri H(2017) emissions associated with the manufacture of the binder phase in concrete J Therm Anal Calorim 2 77-81
[5]  
Liu S(2014)Rapid hardening β-C J Asian Ceram Soc 8 52-66
[6]  
Wang L(2010)S mineral and microstructure changes activated by accelerated carbonation curing Cem Int 121 155-162
[7]  
Gao Y(2015)Low temperature production of wollastonite from limestone and silica sand through solid-state reaction J Therm Anal Calorim 34 1529-1534
[8]  
Yu B(2004)Celitement—a sustainable prospect for the cement industry Cem Concr Res 39 45-53
[9]  
Bai Y(2009)Quantitative thermal analysis of α-C Cem Concr Res 127 221-228
[10]  
Gartner E(2017)SH as a precursor for low-energy cements J Therm Anal Calorim 118 817-823