Effect of indium addition on the microstructural formation and soldered interfaces of Sn-2.5Bi-1Zn-0.3Ag lead-free solder

被引：0
作者：
Ming-jie Dong
Zhi-ming Gao
Yong-chang Liu
Xun Wang
Li-ming Yu
机构：
[1] Tianjin University,School of Materials Science & Engineering, Tianjin Key Laboratory of Advanced Jointing Technology
来源：
International Journal of Minerals, Metallurgy, and Materials | 2012年 / 19卷
关键词：
soldering alloys; indium; microstructure; interfaces; melting point; intermetallics;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The microstructural formation and properties of Sn-2.5Bi−xIn-1Zn-0.3Ag (in wt%) alloys and the evolution of soldered interfaces on a Cu substrate were investigated. Apart from the relatively low melting point (about 195°C), which is close to that of conventional eutectic Sn-Pb solder, the investigated solder presents superior wettability, solderability, and ductility. The refined equiaxial grains enhance the mechanical properties, and the embedded bulk intermetallic compounds (IMCs) (Cu6Sn5 and Cu5Zn8) and granular Bi particles improve the joint reliability. The addition of In reduces the solubility of Zn in the β-Sn matrix and strongly influences the separation and growth behaviors of the IMCs. The soldered interface of Sn-2.5Bi-xIn-1Zn-0.3Ag/Cu consists of Cu-Zn and Cu-Sn IMC layers.
引用
收藏
页码：1029 / 1035
页数：6
相关论文
共 50 条
  • [41] Effect of Pr Addition on Properties of Sn-0.5Ag-0.7Cu-0.5Ga Lead-Free Solder
    Nan Xujing
    Xue Songbai
    Zhai Peizhuo
    Luo Dongxue
    JOURNAL OF ELECTRONIC MATERIALS, 2016, 45 (10) : 5443 - 5448
  • [42] Effect of Co-Addition of Ag and Cu on Mechanical Properties of Sn-5Sb Lead-Free Solder
    Yuan, Biao
    Liang, Zhimin
    Yang, Zongyuan
    Shen, Fei
    Xu, Da
    Wang, Liwei
    Wei, Shaowei
    Wang, Dianlong
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (12) : 2991 - 2999
  • [43] Effect of Small Amount of Ni Addition on Microstructure and Fatigue Properties of Sn-Sb-Ag Lead-Free Solder
    Yamamoto, Mizuki
    Shohji, Ikuo
    Kobayashi, Tatsuya
    Mitsui, Kohei
    Watanabe, Hirohiko
    MATERIALS, 2021, 14 (14)
  • [44] Effect of Zn and Sb Additions on the Impression Creep Behavior of Lead-Free Sn-3.5Ag Solder Alloy
    Pourmajidian, M.
    Mahmudi, R.
    Geranmayeh, A. R.
    Hashemizadeh, S.
    Gorgannejad, S.
    JOURNAL OF ELECTRONIC MATERIALS, 2016, 45 (01) : 764 - 770
  • [45] Effect of Pr Addition on Properties of Sn-0.5Ag-0.7Cu-0.5Ga Lead-Free Solder
    Nan Xujing
    Xue Songbai
    Zhai Peizhuo
    Luo Dongxue
    Journal of Electronic Materials, 2016, 45 : 5443 - 5448
  • [46] The Effects of Ni Nanoparticles Addition on Shear Behavior and Microstructure of Sn-Ag Lead-free Solder
    Qi, Fangjuan
    Sun, Li
    Hou, Zhezhe
    Wang, Jianqiang
    Qin, Cha
    2008 INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING, VOLS 1 AND 2, 2008, : 589 - 591
  • [47] Enhancing the Ductility of Sn-Ag-Cu Lead-Free Solder Joints by Addition of Compliant Intermetallics
    Xie, H. X.
    Chawla, N.
    JOURNAL OF ELECTRONIC MATERIALS, 2013, 42 (03) : 527 - 536
  • [48] Influence of Bi on microstructures evolution and mechanical properties in Sn-Ag-Cu lead-free solder
    Zhao, J
    Qi, L
    Wang, XM
    Wang, L
    JOURNAL OF ALLOYS AND COMPOUNDS, 2004, 375 (1-2) : 196 - 201
  • [49] Creep Properties of Sn-1.0Ag-0.5Cu Lead-Free Solder with Ni Addition
    Che, F. X.
    Zhu, W. H.
    Poh, Edith S. W.
    Zhang, X. R.
    Zhang, Xiaowu
    Chai, T. C.
    Gao, S.
    JOURNAL OF ELECTRONIC MATERIALS, 2011, 40 (03) : 344 - 354
  • [50] Effect of soldering condition on formation of intermetallic phases developed between Sn-0.3Ag-0.7Cu low-silver lead-free solder and Cu substrate
    Mookam, Niwat
    Kanlayasiri, Kannachai
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (21) : 6276 - 6279
12345