Effect of indium addition on the microstructural formation and soldered interfaces of Sn-2.5Bi-1Zn-0.3Ag lead-free solder

被引：0
作者：
Ming-jie Dong
Zhi-ming Gao
Yong-chang Liu
Xun Wang
Li-ming Yu
机构：
[1] Tianjin University,School of Materials Science & Engineering, Tianjin Key Laboratory of Advanced Jointing Technology
来源：
International Journal of Minerals, Metallurgy, and Materials | 2012年 / 19卷
关键词：
soldering alloys; indium; microstructure; interfaces; melting point; intermetallics;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The microstructural formation and properties of Sn-2.5Bi−xIn-1Zn-0.3Ag (in wt%) alloys and the evolution of soldered interfaces on a Cu substrate were investigated. Apart from the relatively low melting point (about 195°C), which is close to that of conventional eutectic Sn-Pb solder, the investigated solder presents superior wettability, solderability, and ductility. The refined equiaxial grains enhance the mechanical properties, and the embedded bulk intermetallic compounds (IMCs) (Cu6Sn5 and Cu5Zn8) and granular Bi particles improve the joint reliability. The addition of In reduces the solubility of Zn in the β-Sn matrix and strongly influences the separation and growth behaviors of the IMCs. The soldered interface of Sn-2.5Bi-xIn-1Zn-0.3Ag/Cu consists of Cu-Zn and Cu-Sn IMC layers.
引用
收藏
页码：1029 / 1035
页数：6
相关论文
共 50 条
  • [21] Effect of rare earths addition on mechanical properties and wetting behavior of Sn-2.5Ag-0.7Cu lead-free solder
    Yang, Jie
    Shu, Pingsheng
    Feng, Xiaole
    Hao, Xiuyun
    Wang, Yupeng
    MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6, 2012, 490-495 : 3119 - +
  • [22] Effect of isothermal ageing process on microstructural changes in Bi-Ag lead-free solder alloys
    Hanim, M. A. Azmah
    Ghamarian, Nima
    Nahavandi, M.
    Zainal, Zulkarnain
    Ngee, Lim Hong
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (01) : 161 - 168
  • [23] Lead-free Sn-Ag and Sn-Ag-Bi solder powders prepared by mechanical alloying
    Lai, HL
    Duh, JG
    JOURNAL OF ELECTRONIC MATERIALS, 2003, 32 (04) : 215 - 220
  • [24] Effect of solidification parameters on the microstructure of directionally solidified Sn-Bi-Zn lead-free solder
    Cadirli, E.
    Boyuk, U.
    Kaya, H.
    Marasli, N.
    METALS AND MATERIALS INTERNATIONAL, 2012, 18 (02) : 349 - 354
  • [25] Effect of solidification parameters on the microstructure of directionally solidified Sn-Bi-Zn lead-free solder
    E. Çadırlı
    U. Böyük
    H. Kaya
    N. Maraşlı
    Metals and Materials International, 2012, 18 : 349 - 354
  • [26] Thermal and mechanical properties of Sn-Zn-Bi lead-free solder alloys
    El-Daly, A. A.
    Swilem, Y.
    Makled, M. H.
    El-Shaarawy, M. G.
    Abdraboh, A. M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 484 (1-2) : 134 - 142
  • [27] Effect of Ag Addition on the Intermetallic Compound and Joint Strength between Sn-Zn-Bi Lead Free Solder and Copper Substrate
    Jasli, Nor Aishah
    Abd Hamid, Hamidi
    Mayappan, Ramani
    2012 35TH IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY SYMPOSIUM (IEMT), 2012,
  • [28] Effect of In addition on the properties of Sn-Au-Cu lead-free solder
    Yin, Siqi
    Huang, Mingliang
    Chen, Yu
    2018 19TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2018, : 1363 - 1367
  • [29] Effect of Sb addition on the tensile deformation behavior of lead-free Sn-3.5Ag solder alloy
    Mahmudi, R.
    Mahin-Shirazi, S.
    MATERIALS & DESIGN, 2011, 32 (10): : 5027 - 5032
  • [30] Effect of a Trace of Bi and Ni on the Microstructure and Wetting Properties of Sn-Zn-Cu Lead-Free Solder
    Haitao MA
    Journal of Materials Science & Technology, 2007, (01) : 83 - 86
12345