Effect of Al-Si alloy powder on properties of corundum-mullite composites

被引：0
作者：
Zhihui Zhang
Zhiwei Fu
Guozhi Ruan
机构：
[1] Shandong University of Science and Technology,School of Material Science and Engineering
来源：
Rare Metals | 2011年 / 30卷
关键词：
corundum; mullite; sintering; densification; Al-Si alloy;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
By means of transient plastic phase process, the corundum-mullite composites were produced using tabular corundum, fused mullite, SiO2 micro powder and Al-Si alloy powder as raw material. The effect of Al-Si alloy powder addition on the sintering, mechanical strength, thermal shock resistance, phase composition and microstructure of the specimens treated at 1550 °C for 3 h in an air atmosphere were studied by XRD and SEM analyses. The results indicate that Al-Si alloy powder can lead to plastic shaping in corundum-mullite materials. At the same time, additive of Al-Si alloy powder can greatly improve the sintering, mechanical strength and thermal shock resistance of corundum-mullite composites. This is because that Al-Si alloy powder can melt, oxidize in sintering. The new oxide can react with the matrix to mullite and the in-situ mullite crystals are needle-like that can interleave with others.
引用
收藏
页码：511 / 514
页数：3
相关论文
共 38 条
[1]  
Sato T.(1986)Sintering and characterization of mullite alumina composites Ceram. Int. 12 61-undefined
[2]  
Shizuka M.(1993)Mechanical properties of alumina-mullite whisker composites J. Ceram. Soc. Japan 101 721-undefined
[3]  
Shimada M.(2003)Mullitisation behaviour of calcined clay-alumina mixture Ceram. Int. 29 561-undefined
[4]  
Tamari N.(2003)The effect of mullite on the mechanical properties and thermal shock behaviour of alumina-mullite refractory materials Ceram. Int. 29 183-undefined
[5]  
Kondoh I.(2001)Synthesis and thermo-mechanical properties of mullite-alumina composite derived from sillimanite beach sand: effect of ZrO Ceram. Int. 27 833-undefined
[6]  
Tanaka T.(1982)Sintering of mullite-containing materials: 1. Effect of composition J. Am. Ceram. Soc. 65 65-undefined
[7]  
Katsuki H.(2003)Current status and out-look of push slab for sintering nitrogen kiln for soft-magnetic ferrites J. Magn. Mater. Devices 34 42-undefined
[8]  
Viswabaskaran V.(2002)The role of fine alumina and mullite particles on the thermomechanical behaviour of alumina-mullite refractory materials Mater. Lett. 57 708-undefined
[9]  
Gnanam F.D.(2005)Effects of firing schedule and binders on properties of corundum-mullite kiln furniture Naihuo Cailiao 39 112-undefined
[10]  
Balasubramanian M.(1993)Transient plastic phase processing of titanium-boron-carbon composites J. Am. Ceram. Soc. 76 1445-undefined
1234