Microstructure and Magnetic Property Variation with Addition of Rare Earth Element Dy in Co-Ni-Al Ferromagnetic Shape Memory Alloy

被引:0
|
作者
Jia Ju
Feng Xue
Hong Li
机构
[1] Southeast University,School of Materials Science and Engineering
来源
Journal of Iron and Steel Research International | 2015年 / 22卷
关键词
magnetic property; martensitic transformation; rare earth; intermetallic compound; hysteresis;
D O I
暂无
中图分类号
学科分类号
摘要
The influence of rare earth element Dy on martensitic transformation and magnetic properties of Co-Ni-Al alloy was studied. The results showed that the microstructure of the sample has a dual-phase structure (γ-phase and martensite). The rare earth element Dy was segregated in Co-rich γ-phase and took the place of Co after its addition into the Co-Ni-Al alloy. As Dy content increased to over 0.5 at. %, the grain was refined and the rare earth intermetallic compounds Co5 Dy were precipitated in y-phase. Meanwhile, one-step thermo-elastic martensitic transformation occurred in the sample, wherein the phase transformation temperature significantly increased with rising Dy content. The martensite had a tetragonal L10 structure with a (111) twinning plane. Furthermore, the sample exhibited obvious hysteresis behaviors in the magnetic hysteresis loops. In addition, the saturation magnetization, coercivity, retentivity and magnetocrystalline anisotropy were significantly enhanced owing to the bigger radius of Dy which took the place of Co in the alloy.
引用
收藏
页码:858 / 863
页数:5
相关论文
共 50 条
  • [41] Effect of adding Ti and rare earth elements on properties of Cu-14Al-4Ni shape memory alloy
    Dalvand, Pegah
    Raygan, Shahram
    Lopez, Gabriel A.
    Chernenko, Volodymyr A.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
  • [42] Influence of Fe Addition on Phase Transformation, Microstructure and Mechanical Property of Equiatomic NiTi Shape Memory Alloy
    Zhao, Ya-Nan
    Jiang, Shu-Yong
    Zhang, Yan-Qiu
    Liang, Yu-Long
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2017, 30 (08) : 762 - 770
  • [43] A large magnetic-field-induced strain in Ni-Fe-Mn-Ga-Co ferromagnetic shape memory alloy
    Morito, Haruhiko
    Oikawa, Katsunari
    Fujita, Asaya
    Fukamichi, Kazuaki
    Kainuma, Ryosuke
    Ishida, Kiyohito
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 577 : S372 - S375
  • [44] Two-way shape memory effect in [001]B2-oriented Co-Ni-Al single crystals
    Eftifeeva, Anna
    Panchenko, Elena
    Chumlyakov, Yuriy
    Maier, Hans Juergen
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (03) : 4789 - 4796
  • [45] Martensitic and magnetic transformations of Ni-Ga-Fe-Co ferromagnetic shape memory alloys
    Imano, Y.
    Omori, T.
    Oikawa, K.
    Sutou, Y.
    Kainuma, R.
    Ishida, K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 438 : 970 - 973
  • [46] Enhancement of microstructure-based magnetic, electronic, and lattice contribution in a CoNiAl ferromagnetic shape memory alloy
    Hossain, Md. Sarowar
    Kanth, B. Rajini
    Mukhopadhyay, P. K.
    SURFACES AND INTERFACES, 2024, 55
  • [47] Martensitic and magnetic transformation in Ni-Mn-Ga-Co ferromagnetic shape memory alloys
    Cong, D. Y.
    Wang, S.
    Wang, Y. D.
    Ren, Y.
    Zuo, L.
    Esling, C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 473 (1-2): : 213 - 218
  • [48] MICROSTRUCTURE AND CHARACTERISTICS OF CU-AL-NI SHAPE MEMORY ALLOY PREPARED BY MECHANICAL ALLOYING
    KANEYOSHI, T
    TAKAHASHI, T
    HAYASHI, Y
    MOTOYAMA, M
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1992, 56 (05) : 517 - 523
  • [49] Designing a New Ni-Mn-Sn Ferromagnetic Shape Memory Alloy with Excellent Performance by Cu Addition
    Zhang, Kun
    Tian, Xiaohua
    Tan, Changlong
    Guo, Erjun
    Zhao, Wenbin
    Cai, Wei
    METALS, 2018, 8 (03)
  • [50] Effect of Cr addition on the structural, magnetic and mechanical properties of magnetron sputtered Ni-Mn-In ferromagnetic shape memory alloy thin films
    Akkera, Harish Sharma
    Kaur, Davinder
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2016, 122 (12):