Effect of tip injection on the flow characteristics of an aeroengine compressor rotor

被引：0

作者：

Li Y. ^{[1
]}

Fang C. ^{[1
]}

Liu X. ^{[1
,2
]}

机构：

[1] Shanghai Jiao Tong University, Shanghai

[2] Key Laboratory (Fluid Machinery and Engineering Research Base) of Sichuan Province, Chengdu

来源：

Aerospace Systems | 2021年 / 4卷 / 2期

基金：

中国国家自然科学基金; 上海市自然科学基金;

关键词：

Aeroengine compressor; Flow stability; Stall margin; Tip injection;

D O I：

10.1007/s42401-020-00078-3

中图分类号：

学科分类号：

摘要：

Existing experiments, simulations, and analysis have shown that the flow field of the blade tip has a significant effect on rotating stall and acoustic resonance in aeroengine compressors. Based on the numerical simulation of NASA rotor 37, the steady influence of air injection at blade tip was investigated in this investigation. The results show that the injected flow could obviously extend the stability margin of the axial compressor to varying degrees. The tip injection reduces the blockage caused by the tip leakage, and reduces the backflow in the trailing edge area of the blade tip, thereby delaying the occurrence of stall. Furthermore, in this paper, different types of rotors are constructed to verify the effect of injection parameters on the stability extension. The results show that the improvement of rotor stall margin is positively correlated with the injector inlet total pressure, and when the injector inlet flow conditions are of the same magnitude, the improvement of the rotor stall margin is negatively related to the distance between the injector and the leading edge of the blade. © 2021, Shanghai Jiao Tong University.

引用

页码：151 / 169

页数：18

共 25 条

[1]

Day I.J., Stall, surge, and 75 years of research, J Turbomach, 138, 1, (2015)

[2]

Wu Y.H., Chu W.L., Numerical investigation of the unsteady behavior of tip clearance flow and its possible link to stall inception, Proc Inst Mech Eng Part A J Power Energy, 224, 1, pp. 85-96, (2010)

[3]

Wu Y.H., Chu W.L., Behavior of tip leakage flow in an axial flow compressor rotor, Proc Inst Mech Eng Part A J Power Energy, 221, 1, pp. 99-110, (2007)

[4]

Furukawa M., Kazuhisa S., Unsteady Flow Behavior due to Breakdown of Tip Leakage Vortex in an Axial Compressor Rotor at Near-Stall Condition, (2000)

[5]

Furukawa M., Inoue M., Saiki K., The role of tip leakage vortex breakdown in compressor rotor aerodynamics, J Turbomach, 121, 3, pp. 469-480, (1999)

[6]

Day I.J., Active suppression of rotating stall and surge in axial compressors, J Turbomach, 115, 1, pp. 40-47, (1993)

[7]

Weigl H.J., Paduano J.D., Frechette L.G., Et al., Active stabilization of rotating stall and surge in a transonic single-stage axial compressor, J Turbomach, 120, 4, pp. 625-636, (1998)

[8]

Freeman C., Wilson A.G., Day I.J., Swinbanks M.A., Experiments in active control of stall on an aeroengine gas turbine, J Turbomach, 120, 4, pp. 637-647, (1998)

[9]

Liu X.H., Teng J.F., Yang J., Sun X.F., Sun D.K., He C., Du J., Calculation of stall margin enhancement with micro-tip injection in an axial compressor, J Fluids Eng, 141, 8, (2019)

[10]

Chen J.P., Johnson B., Hathaway M.D., Webster R.S., Flow characteristics of tip injection on compressor rotating spike via time-accurate simulation, J Propul Power, 25, 3, pp. 678-687, (2009)

← 1 2 3 →