Thermal-mechanical coupled analysis of a brake disk rotor

被引：4
|
作者：
Belhocine A. [1 ]
Bouchetara M. [1 ]
机构：
[1] Faculty of Mechanical Engineering, University of Sciences and the Technology of Oran (USTO), L.P 1505 El-Mnaouer
来源：
Journal of Failure Analysis and Prevention | 2013年 / 13卷 / 2期
关键词：
Brake disks; Contact pressure; Heat flux; Heat-transfer coefficient; Von Mises stress;
D O I：
10.1007/s11668-012-9634-5
中图分类号：
学科分类号：
摘要：
The main purpose of this study is to analyze the thermomechanical behavior of the dry contact between the brake disk and pads during the braking phase. The simulation strategy is based on computer code ANSYS11. The modeling of transient temperature in the disk is actually used to identify the factor of geometric design of the disk to install the ventilation system in vehicles. The thermal-structural analysis is then used with coupling to determine the deformation and the Von Mises stress established in the disk, i.e., the contact pressure distribution in pads. The results are satisfactory when compared to those of the specialized literature. © 2013 ASM International.
引用
收藏
页码：167 / 176
页数：9
相关论文
共 50 条
  • [41] Randomization analysis of the thermal-mechanical crack growth
    Yang, Hongqin
    Bao, Rui
    Zhang, Jianyu
    Fei, Binjun
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2009, 35 (09): : 1134 - 1138
  • [42] 2D coupled thermal-mechanical analysis on embankment longitudinal cracks in permafrost regions
    Yaling, Chou
    Gongqi, Yang
    Baoan, Li
    Electronic Journal of Geotechnical Engineering, 2015, 20 (01): : 273 - 286
  • [43] Thermo-mechanical stress analysis of disc brake rotor
    Belhocine, Ali
    Bouchetara, Mostefa
    International Journal of Vehicle Structures and Systems, 2013, 5 (01) : 15 - 22
  • [44] Thermal-mechanical coupled performance analysis of U-50Zr helical cruciform fuel
    Cai, Mengke
    Cong, Tenglong
    Gu, Hanyang
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2022, 43 (12): : 1772 - 1777
  • [45] Nonlinear thermal-mechanical coupled isogeometric analysis for GPLs reinforced functionally graded porous plates
    Liu, Tao
    Sun, Xiangrong
    Hu, Wenfeng
    Wang, Lu
    Zhang, Shunqi
    Bui, Tinh Quoc
    ENGINEERING STRUCTURES, 2024, 319
  • [46] Thermal-mechanical fully coupled analysis of high-speed angular contact ball bearings
    Wang, Lanwen
    Sheng, Xuanyu
    Luo, Jianbin
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021, 35 (02) : 669 - 678
  • [47] Thermal-mechanical coupled numerical analysis of laser + GMAW hybrid heat source welding process
    Wu X.
    Su H.
    Sun Y.
    Chen J.
    Wu C.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2021, 42 (01): : 91 - 96
  • [48] An analysis of thermal gradient impact in thermal-mechanical fatigue testing
    Maurel, V.
    Koster, A.
    Remy, L.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2010, 33 (08) : 473 - 489
  • [49] 2D coupled thermal-mechanical analysis on embankment longitudinal cracks in permafrost regions
    20151300681645
    2015, E-Journal of Geotechnical Engineering (20):
  • [50] Thermal-mechanical fully coupled analysis of high-speed angular contact ball bearings
    Lanwen Wang
    Xuanyu Sheng
    Jianbin Luo
    Journal of Mechanical Science and Technology, 2021, 35 : 669 - 678
12345