Thermal-mechanical coupled analysis of a brake disk rotor

被引：4
|
作者：
Belhocine A. [1 ]
Bouchetara M. [1 ]
机构：
[1] Faculty of Mechanical Engineering, University of Sciences and the Technology of Oran (USTO), L.P 1505 El-Mnaouer
来源：
Journal of Failure Analysis and Prevention | 2013年 / 13卷 / 2期
关键词：
Brake disks; Contact pressure; Heat flux; Heat-transfer coefficient; Von Mises stress;
D O I：
10.1007/s11668-012-9634-5
中图分类号：
学科分类号：
摘要：
The main purpose of this study is to analyze the thermomechanical behavior of the dry contact between the brake disk and pads during the braking phase. The simulation strategy is based on computer code ANSYS11. The modeling of transient temperature in the disk is actually used to identify the factor of geometric design of the disk to install the ventilation system in vehicles. The thermal-structural analysis is then used with coupling to determine the deformation and the Von Mises stress established in the disk, i.e., the contact pressure distribution in pads. The results are satisfactory when compared to those of the specialized literature. © 2013 ASM International.
引用
收藏
页码：167 / 176
页数：9
相关论文
共 50 条
  • [1] Thermal-mechanical coupled analysis of a brake disk rotor
    Belhocine, Ali
    Bouchetara, Mostefa
    HEAT AND MASS TRANSFER, 2013, 49 (08) : 1167 - 1179
  • [2] Thermal–mechanical coupled analysis of a brake disk rotor
    Ali Belhocine
    Mostefa Bouchetara
    Heat and Mass Transfer, 2013, 49 : 1167 - 1179
  • [3] Sequentially Coupled Thermal-mechanical Analysis of the Brake Disc Used in Air Disc Brake
    Pei, Shuanghong
    Guo, Xuexun
    Wei, Fudong
    ADVANCES IN APPLIED SCIENCES AND MANUFACTURING, PTS 1 AND 2, 2014, 850-851 : 245 - +
  • [4] Thermal-mechanical coupled simulation of a solid brake disc in repeated braking cycles
    Hwang, P.
    Wu, X.
    Jeon, Y. B.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2009, 223 (J7) : 1041 - 1048
  • [5] DYNAMIC AND THERMAL-ANALYSIS OF A LIGHT TRUCK DISK BRAKE ROTOR
    SCHWEET, RR
    LIVINGSTON, JS
    1989 ANSYS CONFERENCE PROCEEDINGS, VOL 2: ENGINEERING DESIGN OPTIONS : FROM PCS TO PARALLELS, 1989, : I16 - I30
  • [6] Thermal-mechanical coupling analysis and optimization of mine hoist brake disc
    Wang, Chuanli
    Wang, Shun
    Jin, Huawei
    Huo, Huanyu
    Xu, Huwei
    Chen, Zhuqi
    ADVANCES IN MECHANICAL ENGINEERING, 2022, 14 (06)
  • [7] A Coupled Thermal-Mechanical Analysis of Ultrasonic Bonding Mechanism
    Chunbo (SAM) Zhang
    Leijun Li
    Metallurgical and Materials Transactions B, 2009, 40 : 196 - 207
  • [8] A Coupled Thermal-Mechanical Analysis of Ultrasonic Bonding Mechanism
    Zhang, Chunbo
    Li, Leijun
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2009, 40 (02): : 196 - 207
  • [9] Numerical Simulation and Experiment for Thermal-mechanical Coupling of Disc Brake
    Zhang, Jian
    Du, Jiajun
    Zhu, Yongmei
    Tan, Xuelong
    PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON INFORMATION ENGINEERING FOR MECHANICS AND MATERIALS, 2016, 97 : 497 - 502
  • [10] Analysis of thermal-mechanical coupling of automotive disc brake based on numerical simulation method
    Wang, Kuiyang
    Tang, Jinhua
    Open Mechanical Engineering Journal, 2015, 9 (01): : 28 - 33
12345