Bifurcation analyses on the chatter vibrations of a turning process with state-dependent delay

被引：0
作者：
Pilkee Kim
Jongwon Seok
机构：
[1] Chung-Ang University,School of Mechanical Engineering, College of Engineering
来源：
Nonlinear Dynamics | 2012年 / 69卷
关键词：
Chatter vibration; State-dependent delay; Structural nonlinearity; Bifurcation analysis; Method of harmonic balance; Method of multiple scales;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Bifurcation analyses are performed using the methods of multiple scales and harmonic balance in order to investigate the chatter vibration characteristics of a nonlinear turning system with state-dependent delay. In this study, the tool of the turning system is modeled as a two degrees of freedom oscillator and both the nonlinear stiffness and the nonlinear cutting force are considered. Prior to performing the bifurcation analyses, the nonlinear cutting force is appropriately expanded using a Taylor series, and an eigenanalysis is performed on the linearized system to obtain the linear stability boundaries. The bifurcation analyses are then performed and examined to explain the effect of state-dependent delay on the small- and large-amplitude behavior of the turning system. Analytic results derived from this study are validated through direct comparison with numerical results.
引用
收藏
页码：891 / 912
页数：21
相关论文
共 57 条
  • [1] Park C.-W.(2009)Energy consumption reduction technology in manufacturing—a selective review of policies, standards, and research Int. J. Precis. Eng. Manuf. 10 151-173
  • [2] Kwon K.-S.(1974)A theory of nonlinear regenerative chatter J. Eng. Ind. Trans. 96 247-255
  • [3] Kim W.-B.(1984)Theory of finite amplitude machine tool instability Int. J. Mach. Tool Des. Res. 24 45-69
  • [4] Min B.-K.(2005)Regenerative tool chatter near a codimension 2 Hopf point using multiple scales Nonlinear Dyn. 40 323-338
  • [5] Park S.-J.(2001)Nonlinear regenerative chatter in turning Robot. Comput.-Integr. Manuf. 17 107-112
  • [6] Sung I.-H.(2005)Delay, parametric excitation, and the nonlinear dynamics of cutting process Int. J. Bifurc. Chaos 15 2783-2798
  • [7] Yoon Y.-S.(2008)Self-interrupted regenerative metal cutting in turning Int. J. Non-Linear Mech. 43 111-123
  • [8] Lee K.-S.(2011)On the global dynamics of chatter in the orthogonal cutting model Int. J. Non-Linear Mech. 46 330-338
  • [9] Lee J.-H.(1998)Analysis of nonlinear vibrations in metal cutting Int. J. Mech. Sci. 40 735-748
  • [10] Seok J.(1989)An approach to study the effects of tool geometry on the primary chatter vibration in orthogonal cutting J. Sound Vib. 28 451-469
123456