Heat transfer in a large-scale circulating fluidized bed boiler

被引:10
作者
Cheng L. [1 ]
Wang Q. [1 ]
Shi Z. [1 ]
Luo Z. [1 ]
Ni M. [1 ]
Cen K. [1 ]
机构
[1] Institute for Thermal Power Engineering, State Key Laboratory of Clean Energy Utilization, Zhejiang University
来源
Frontiers of Energy and Power Engineering in China | 2007年 / 1卷 / 4期
关键词
Boiler; Circulating fluidized bed (CFB); Engineering heat transfer; Heat transfer; Industrial boiler;
D O I
10.1007/s11708-007-0071-5
中图分类号
学科分类号
摘要
Heat transfer of a furnace in a large-scale circulating fluidized bed (CFB) boiler was studied based on the analysis of available heat transfer coefficient data from typical industrial CFB boilers and measured data from a 12 MW e, a 50 MWe and a 135 MWe CFB boiler. The heat transfer of heat exchanger surfaces in a furnace, in a steam/water cooled cyclone, in an external heat exchanger and in the backpass was also reviewed. Empirical correlation of heat transfer coefficient was suggested after calculating the two key parameters, solids suspension density and furnace temperature. The correlation approach agrees well with the data from the large-scale CFB boilers. © 2007 Higher Education Press and Springer-Verlag.
引用
收藏
页码:477 / 482
页数:5
相关论文
共 14 条
[1]  
Cheng L., Luo Z., Ni M., Et al., A summary of the circulating fluidized bed heat transfer (mathematical model part), Journal of Power Engineering, 18, pp. 48-53, (1988)
[2]  
Cheng L., Luo Z., Ni M., Et al., A summary of the circulating fluidized bed heat transfer (testing part), Journal of Power Engineering, 18, pp. 20-34, (1988)
[3]  
Cheng L., Cen K., Ni M., Et al., Thermal calculation of a circulating fluidized bed boiler furnace, Proceedings of the CSEE, 22, pp. 146-151, (2002)
[4]  
Cheng L., Ye W., Cheng L., Heat transfer calculation guideline for a circulating fluidized bed, Thermal Calculation Method for Grate-Firing and Fluidized Bed Industrial Boiler, General Methods of Calculation and Design for Industrial Boiler, pp. 80-88, (2003)
[5]  
Andersson B., Leckner B., Experimental methods of estimating heat transfer in circulating fluidized bed boilers, International Journal of Heat and Mass Transfer, 35, (1992)
[6]  
Zhang H., Lu J.F., Yang H.R., Et al., Heat transfer measurements inside the furnace of a 135 MW<sub>e</sub> CFB boiler, Circulating Fluidized Bed Technology VIII, pp. 254-260, (2005)
[7]  
Andersson B., Leckner B., Bed-to-wall heat transfer in circulating fluidized bed boilers, 2nd Minsk International Heat and Mass Transfer Forum, (1992)
[8]  
Wang Y., Lu J.F., Yang H.R., Et al., Measurement of heat transfer in a 465 t/h circulating fludized bed boiler, Proc. of the 18th Inter Conf on Fluidized Bed Combustion, FBC2005-78050, (2005)
[9]  
Cheng L., Heat transfer in a commercial circulating fluidized bed boiler, Journal of Power Engineering, 20, pp. 587-591, (2000)
[10]  
Dutta A., Basu P., An experimental investigation into the heat transfer on wing walls in a circulating fluidized bed boiler, Inter J Heat and Mass Transfer, 45, (2002)