Prediction of fatigue life in cold expanded Al-alloy 2024-T3 plates used in double shear lap joints

被引：0
作者：
Hadi Taghizadeh
Tajbakhsh Navid Chakherlou
Afshin Babaei Aghdam
机构：
[1] University of Tabriz,Faculty of Mechanical Engineering
[2] Louisiana State University,Department of Mechanical Engineering
来源：
Journal of Mechanical Science and Technology | 2013年 / 27卷
关键词：
Life prediction; Double shear lap joints; Cold expansion; Fatigue crack initiation; Fatigue crack growth;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
To predict fatigue crack initiation and fatigue crack growth lives in cold expanded double shear lap joints a numerical method has been employed. The total estimated fatigue lives were compared with available experimental fatigue test results for plain hole and cold expanded hole specimens of Al 2024-T3 in double shear lap joints. Three-dimensional finite element simulations have been performed in order to obtain the created residual stresses field due to cold expansion and subsequent far field longitudinal loading in the double shear lap joint. The obtained stress and strain distributions from the finite element analyses were employed to predict stress concentration factors to calculate fatigue crack initiation and fatigue crack growth lives using AFGROW computer code. The predicted fatigue lives demonstrate that there is a good agreement between the proposed method and experimental fatigue test results.
引用
收藏
页码：1415 / 1425
页数：10
相关论文
共 94 条
[11]  
Saeedi Kh(2005)Analysis of the residual stress around a cold-expanded fastener hole in a finite plate Strain. 41 59-70
[12]  
Chakherlou T N(1993)Elastic-plastic analysis of a finite sheet with a cold-worked hole Eng. Frac. Mech. 46 465-472
[13]  
Oskouei R H(2009)Three dimensional finite element analysis of a split-sleeve cold expansion process J. Eng. Mater. Technol. 131 031007-14-507
[14]  
Vogwell J(2010)An FE analysis for assessing the effect of short-term exposure to elevated temperature on residual stresses around cold expanded fastener holes in aluminum alloy 7075-T6 Mater. Des. 31 500-1007
[15]  
Chandawanich N(2005)Numerical simulation of cold working of rivet holes Finite Elem. Anal. Des. 41 989-247
[16]  
Sharpe W N(1992)Effects of cold expansion of a hole on fatigue crack initiation location and life of an LY12CZ alloy Fatigue Fract. Eng. Mater. Struct. 15 241-589
[17]  
Smith D J(1991)Modelling residual stresses and fatigue crack growth at cold-expanded fastener holes Fatigue Fract. Eng. Mater. Struct. 14 579-36
[18]  
Poussard C G C(2010)On the estimation of fatigue life in notches differentiating the phases of crack initiation and propagation Fatigue Fract. Eng. Mater. Struct. 33 22-65
[19]  
Pavier M J(1997)Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity Int. J. Fatigue. 19 647-84
[20]  
Ozdemir A T(1979)Prediction of non-propagating cracks Eng. Fract. Mech. 11 573-119
12345678910