Tunable waveguide bandpass filter design using a sequential design process

被引:0
作者
Hyundo Shin
Jeonghoon Yoo
机构
[1] Yonsei University,Graduate School of Mechanical Engineering
[2] Yonsei University,School of Mechanical Engineering
来源
International Journal of Precision Engineering and Manufacturing | 2017年 / 18卷
关键词
Waveguide structure design; Tunable filter; Finite element method; On/Off method;
D O I
暂无
中图分类号
学科分类号
摘要
In this study, a symmetric waveguide bandpass filter is proposed using a systematic design process. The waveguide device is designed to control the operation frequency range by changing the metallic barrier width in the system and the finite element method is employed for numerical analysis. We used topology optimization based on the On/Off method for initial concept design with the design objective to maximize the transmitted electric intensity at the target frequency. Detail two-dimensional metallic structure for a tunable bandpass filter was determined through successive parametric studies using the shape primitively derived from the On/Off method. The performance of the proposed waveguide system was verified by numerical simulations and experimental measurements.
引用
收藏
页码:845 / 852
页数:7
相关论文
共 64 条
[1]  
Atia A. E.(1972)Narrow-Bandpass Waveguide Filters IEEE Transactions on Microwave Theory and Techniques 20 258-265
[2]  
Williams A. E.(1995)Angular Bandpass Filters: An Alternative Viewpoint Gives Improved Design Flexibility IEEE Transactions on Antennas and Propagation 43 390-395
[3]  
Kinowski D.(1999)Analysis of Propagation in Periodically Loaded Circular Waveguides IEE Proceedings-Microwaves, Antennas and Propagation 146 50-54
[4]  
Guglielmi M.(2006)Synthesis and Design of Asymmetrical Dual-Band Bandpass Filters Based on Equivalent Network Simplification IEEE Transactions on Microwave Theory and Techniques 54 3090-3097
[5]  
Roederer A. G.(2002)Adaptive Synthesis and Design of Resonator Filters with Source/Load-Multiresonator Coupling IEEE Transactions on Microwave Theory and Techniques 50 1969-1978
[6]  
Amari S.(2002)Microwave Filters-Applications and Technology IEEE Transactions on Microwave Theory and Techniques 50 794-805
[7]  
Vahldieck R.(2009)Full-Wave Analysis and Design of Dielectric-Loaded Waveguide Filters Using a State-Space Integral-Equation Method IEEE Transactions on Microwave Theory and Techniques 57 109-120
[8]  
Bornemann J.(2014)Rectangular Waveguide Enabling Technology Using Holey Surfaces and Wire Media Metamaterials Sensors and Actuators A: Physical 209 1-8
[9]  
Lenoir P.(2012)A Systematic Design Procedure of Classical Dual-Mode Circular Waveguide Filters Using an Equivalent Distributed Model IEEE Transactions on Microwave Theory and Techniques 60 1006-1017
[10]  
Bila S.(2013)A Deterministic EMDesign Technique for General Waveguide Dual-Mode Bandpass Filters IEEE Transactions on Microwave Theory and Techniques 61 800-807