748 K (475 °C) Embrittlement of Duplex Stainless Steel: Effect on Microstructure and Fracture Behavior

被引:0
|
作者
Cem Örnek
M. G. Burke
T. Hashimoto
D. L. Engelberg
机构
[1] The University of Manchester,Materials and Performance Centre, School of Materials
[2] The University of Manchester,Corrosion and Protection Centre, School of Materials
[3] KTH Royal Institute of Technology,Division of Surface and Corrosion Science
来源
Metallurgical and Materials Transactions A | 2017年 / 48卷
关键词
Ferrite; Austenite; Stress Corrosion Crack; Duplex Stainless Steel; Interphase Boundary;
D O I
暂无
中图分类号
学科分类号
摘要
22Cr-5Ni duplex stainless steel (DSS) was aged at 748 K (475 °C) and the microstructure development correlated to changes in mechanical properties and fracture behavior. Tensile testing of aged microstructures confirmed the occurrence of 748 K (475 °C) embrittlement, which was accompanied by an increase of strength and hardness and loss of toughness. Aging caused spinodal decomposition of the ferrite phase, consisting of Cr-enriched α″ and Fe-rich α′ and the formation of a large number of R-phase precipitates, with sizes between 50 and 400 nm. Fracture surface analyses revealed a gradual change of the fracture mode from ductile to brittle delamination fracture, associated with slip incompatibility between ferrite and austenite. Ferrite became highly brittle after 255 hours of aging, mainly due to the presence of precipitates, while austenite was ductile and accommodated most plastic strain. The fracture mechanism as a function of 748 K (475 °C) embrittlement is discussed in light of microstructure development.
引用
收藏
页码:1653 / 1665
页数:12
相关论文
共 50 条
  • [41] Strengthening Effect of Nb on Microstructure and Cavitation Erosion Behavior of Duplex Stainless Steel Surfacing Layer
    Yefeng Bao
    Zhuyu Wu
    Bingqi Xie
    Linpo Guo
    Zirui Wang
    Qining Song
    Yongfeng Jiang
    Journal of Materials Engineering and Performance, 2024, 33 : 240 - 255
  • [42] Effect of Different Chromium Additions on the Microstructure and Mechanical Properties of Multipass Weld Joint of Duplex Stainless Steel
    Dong Hoon Kang
    Hae Woo Lee
    Metallurgical and Materials Transactions A, 2012, 43 : 4678 - 4687
  • [43] Influence of phase morphology on hydrogen embrittlement of type 2205 duplex stainless steel
    Wang, Yanfei
    Zhao, Yuhang
    Huang, Yuting
    Chen, Jihan
    Tao, Ping
    Li, Xinfeng
    Wu, Weijie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 934
  • [44] EFFECT OF STRUCTURAL ORIENTATION ON THE SUSCEPTIBILITY OF COMMERCIAL DUPLEX STAINLESS-STEELS TO HYDROGEN EMBRITTLEMENT
    ZHENG, W
    HARDIE, D
    CORROSION, 1991, 47 (10) : 792 - 799
  • [45] Role of microstructure on the corrosion susceptibility of UNSS32101 duplex stainless steel
    Bhattachatya, A.
    Singh, P. M.
    CORROSION, 2008, 64 (06) : 532 - 540
  • [46] Effect of cold rolling on microstructure and magnetic properties in a metastable lean duplex stainless steel
    Silvia Baldo
    Istvan Mészáros
    Journal of Materials Science, 2010, 45 : 5339 - 5346
  • [47] Effect of hot deformation mode on the microstructure evolution of lean duplex stainless steel 2101
    Liu, Yanyan
    Yan, Haitao
    Wang, Xinhua
    Yan, Mi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 575 : 41 - 47
  • [48] The effect of duplex stainless steel microstructure on its cavitation morphology in seawater
    Al-Hashem, A
    Riad, W
    MATERIALS CHARACTERIZATION, 2001, 47 (05) : 389 - 395
  • [49] Effect of shot peening on the residual stress and microstructure of duplex stainless steel
    Feng, Qiang
    Jiang, Chuanhai
    Xu, Zhou
    Xie, Lechun
    Ji, Vincent
    SURFACE & COATINGS TECHNOLOGY, 2013, 226 : 140 - 144
  • [50] The effect of chemical composition and annealing condition on the microstructure and tensile properties of a resource-saving duplex stainless steel
    Pan, Mingming
    Zhang, Xiaoming
    Chen, Peng
    Su, XiangBin
    Misra, R. D. K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 788 (788):