748 K (475 °C) Embrittlement of Duplex Stainless Steel: Effect on Microstructure and Fracture Behavior

被引:0
|
作者
Cem Örnek
M. G. Burke
T. Hashimoto
D. L. Engelberg
机构
[1] The University of Manchester,Materials and Performance Centre, School of Materials
[2] The University of Manchester,Corrosion and Protection Centre, School of Materials
[3] KTH Royal Institute of Technology,Division of Surface and Corrosion Science
来源
Metallurgical and Materials Transactions A | 2017年 / 48卷
关键词
Ferrite; Austenite; Stress Corrosion Crack; Duplex Stainless Steel; Interphase Boundary;
D O I
暂无
中图分类号
学科分类号
摘要
22Cr-5Ni duplex stainless steel (DSS) was aged at 748 K (475 °C) and the microstructure development correlated to changes in mechanical properties and fracture behavior. Tensile testing of aged microstructures confirmed the occurrence of 748 K (475 °C) embrittlement, which was accompanied by an increase of strength and hardness and loss of toughness. Aging caused spinodal decomposition of the ferrite phase, consisting of Cr-enriched α″ and Fe-rich α′ and the formation of a large number of R-phase precipitates, with sizes between 50 and 400 nm. Fracture surface analyses revealed a gradual change of the fracture mode from ductile to brittle delamination fracture, associated with slip incompatibility between ferrite and austenite. Ferrite became highly brittle after 255 hours of aging, mainly due to the presence of precipitates, while austenite was ductile and accommodated most plastic strain. The fracture mechanism as a function of 748 K (475 °C) embrittlement is discussed in light of microstructure development.
引用
收藏
页码:1653 / 1665
页数:12
相关论文
共 50 条
  • [1] 748 K (475 A°C) Embrittlement of Duplex Stainless Steel: Effect on Microstructure and Fracture Behavior
    Ornek, Cem
    Burke, M. G.
    Hashimoto, T.
    Engelberg, D. L.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (04): : 1653 - 1665
  • [2] The fracture mechanism of 475 degrees C embrittlement in a duplex stainless steel
    Marrow, TJ
    Harris, C
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1996, 19 (07) : 935 - 947
  • [3] Effect of 475 °C embrittlement on the mechanical properties of duplex stainless steel
    Sahu, J. K.
    Krupp, U.
    Ghosh, R. N.
    Christ, H. -J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 508 (1-2): : 1 - 14
  • [4] The Effects of 475 °C Embrittlement on the Mechanical Behavior of Thermally Aged 2507 and 2101 Duplex Stainless Steel Alloys
    Vania Rodríguez-Herrejón
    Alberto Ruiz
    Journal of Materials Engineering and Performance, 2023, 32 : 4626 - 4642
  • [5] The Effects of 475 °C Embrittlement on the Mechanical Behavior of Thermally Aged 2507 and 2101 Duplex Stainless Steel Alloys
    Rodriguez-Herrejon, Vania
    Ruiz, Alberto
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (10) : 4626 - 4642
  • [6] The brittle fracture of 475 degrees C embrittled cast duplex stainless steel
    Marrow, TJ
    Bury, N
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1997, 20 (04) : 565 - 571
  • [7] Effect of Ni content on 475°C embrittlement of directed energy deposited duplex stainless steel using a laser beam and wire feedstock
    Baghdadchi, Amir
    Thuvander, Mattias
    Wessman, Sten
    Alexandrov, Boian T.
    Andersson, Joel
    MATERIALIA, 2024, 36
  • [8] Characterization of 475 °C Embrittlement of Duplex Stainless Steel Microstructure via Scanning Kelvin Probe Force Microscopy and Magnetic Force Microscopy
    Ornek, C.
    Walton, J.
    Hashimoto, T.
    Ladwein, T. L.
    Lyon, S. B.
    Engelberg, D. L.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2017, 164 (06) : C207 - C217
  • [9] Effect of 475°C embrittlement on the low cycle fatigue behaviour of lean duplex stainless steels
    Strubbia, Renata
    Sennour, Mohamed
    Herenu, Silvina
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2018, 41 (02) : 473 - 482
  • [10] Effect of hydrogen concentration on the embrittlement of a duplex stainless steel
    Zakroczymski, T
    Glowacka, A
    Swiatnicki, W
    CORROSION SCIENCE, 2005, 47 (06) : 1403 - 1414