Inverse determination of improved constitutive equation for cutting titanium alloy Ti-6Al-4V based on finite element analysis

被引:1
作者
Junxue Ren
Ju Cai
Jinhua Zhou
Kaining Shi
Xiangyu Li
机构
[1] Northwestern Polytechnical University,School of Mechanical Engineering
[2] National University of Singapore,Department of Mechanical Engineering
来源
The International Journal of Advanced Manufacturing Technology | 2018年 / 97卷
关键词
Constitutive model; Titanium alloy Ti-6Al-4V; Inverse identification; Finite element analysis; Response surface method; Firefly algorithm;
D O I
暂无
中图分类号
学科分类号
摘要
Constitutive model plays an important role in finite element (FE) simulation of machining, especially the Johnson-Cook (J-C) model. Although many researches have completed on modifying the J-C model to improve FE simulation of cutting, the systematic determination scheme of the added coefficients is heretofore not available. Inverse identification approach presents a promising advantage on determining constitutive coefficient compared with traditional methods, such as Split Hopkinson Pressure Bar (SHPB). In this work, a new inverse method based on finite element analysis (FEA) is developed for determining added J-C coefficients. A modified J-C constitutive model (MJC) including hyperbolic tangent failure function is introduced for machining titanium alloy Ti-6Al-4V. The determination process of the added coefficients is taken as an optimization problem, where experimental cutting forces and the added J-C coefficients are considered as the optimization objectives and design variables, respectively. An FE model of orthogonal cutting titanium alloy Ti-6Al-4V is established on the Deform-2D simulation platform. The response surface method (RSM) is subsequently used to build the mapping relation of the simulated cutting forces and the added coefficients. Then, orthogonal cutting experiments are conducted to obtain the objective cutting forces. The firefly algorithm (FA) is employed to solve the optimization model for the optimal added J-C coefficients. Verification results show that the identified constitutive model has higher accuracy on predicting cutting forces compared with other models including the origin J-C model and the Calamaz’s model.
引用
收藏
页码:3671 / 3682
页数:11
相关论文
共 105 条
  • [1] Calamaz M(2008)A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V Int J Mach Tools Manuf 48 275-288
  • [2] Coupard D(2002)Adiabatic shear banding in high speed machining of Ti–6Al–4V: experiments and modeling Int J Plast 18 443-459
  • [3] Girot F(2016)FEM-based prediction of heat partition in dry metal cutting of AISI 1045 Int J Adv Manuf Technol 86 737-745
  • [4] Molinari A(2013)Determination of constitutive material model parameters in FE-based machining simulations of Ti-6Al-4V and in-100 alloys: an inverse methodology Trans North Am Manuf Res Inst SME 41 368-373
  • [5] Musquar C(1987)Dislocation-mechanics-based constitutive relations for material dynamics calculations J Appl Phys 61 1816-1825
  • [6] Sutter G(1988)A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable Acta Metall 36 81-93
  • [7] Puls H(2012)Application of genetic algorithms for optimizing the Johnson-Cook constitutive model parameters when simulating the titanium alloy Ti-6Al-4V machining process Proc Inst Mech Eng Part B J Eng Manuf 226 1287-1297
  • [8] Klocke F(2010)A modified Johnson-Cook constitutive model for Mg-Gd-Y alloy extended to a wide range of temperatures Comput Mater Sci 50 147-152
  • [9] Veselovac D(2013)Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature Mater Sci Eng A 580 385-390
  • [10] Ulutan D(2015)Shear localization sensitivity analysis for Johnson–Cook constitutive parameters on serrated chips in high speed machining of Ti6Al4V Simul Model Pract Theory 55 63-76