Application of friction stir welding to dissimilar welding to dissimilar welding

被引：0

作者：

Karlsson L. ^{[1
]}

Berqvist E.-L. ^{[1
]}

Larsson H. ^{[2
]}

机构：

[1] ESAB,

[2] Volvo Car Corp.,undefined

来源：

Welding in the World | 2002年 / 46卷 / 1-2期

关键词：

Al Mg Si alloys; Aluminium; Aluminium alloys; Bend tests; Clad metals; Copper; Dissimilar materials; Friction stir welding; Hardness; Mechanical properties; Metallography; Microanalysis; Microstructure; Process procedures; Tensile tests;

D O I：

10.1007/BF03266360

中图分类号：

学科分类号：

摘要：

The potential of friction stir welding (FSW) for dissimilar joining has been evaluated. Different joint configurations and welding speeds were used to study the effect of welding parameters on weld quality and properties. High quality dissimilar friction stir welds were produced between AA 5083 and AA 6082 aluminium, with mechanical properties approaching those of welds in AA 6082. Al-clad thin sheet AA 2024 was successfully welded, illustrating the potential of using FSW for joining clad material. Also Cu and AA 5083 was joined with promising results. A higher welding travel speed generally resulted in higher strength and better ductility. The nugget annual ring pattern was pronounced in AA 5083/AA 6082 welds, consisting of intimately bonded alternating regions with compositions corresponding to the two alloys. Possibilities of optimising productivity and weld properties are discussed in terms of the relation between microstructure, properties and welding conditions.

引用

页码：10 / 14

页数：4

共 11 条

[1]

Svensson L.-E., Karlsson L., Larsson H., Karlsson B., Fazzini M., Karlsson J., Science & Technology of Welding and Joining, 5, 5, pp. 285-296, (2000)

[2]

Thomas W.M., (1993)

[3]

Midling O., Et al., Proc. "1st Int. Symp. On FSW", Thousand Oaks, Ca, June 1999, TWI

[4]

Waldron D.J., Proc. "1st Int. Symp. On FSW", Thousand Oaks, Ca, June 1999, TWI

[5]

Hashimoto T., Et al., Proc. 7th Int. Conf. Joints in Al., Cambridge, UK, April 1998, TWI

[6]

Mahoney M.W., Harrigan W., Wert J.A., Proc. 7th Int. Conf. Joints in Al., Cambridge, UK, April 1998, TWI

[7]

Palm F., Proc. GKSS/TWI Workshop FSW, Geesthacht, Germany, May 1999, pp. 23-29

[8]

Threadgill P., TWI Bulletin, 38, 2, pp. 30-33, (1997)

[9]

Larsson H., Karlsson L., Stoltz S., Bergqvist E.-L., Proc. "2nd Int. Symp. On FSW", Gothenburg, Sweden, June 2000, TWI

[10]

Thomas W.M., Woolin P.L., Johnson K.I., Steel World, 4, 2, pp. 55-59

← 1 2 →