Properties of Conductive Adhesive with Carbonyl Nickel as Filler

被引：0
|
作者：
Isaev A.Y. [1 ]
Petrova A.P. [1 ]
Smirnov O.I. [1 ]
Balabanova O.S. [1 ]
机构：
[1] Federal State Unitary Enterprise “All-Russian Institute of Aviation Materials”, Moscow
来源：
Polymer Science - Series D | 2023年 / 16卷 / 01期
关键词：
adhesive joint; carbonyl nickel; electrical conductivity; electrical contact; glue;
D O I：
10.1134/S1995421223010112
中图分类号：
学科分类号：
摘要：
Abstract: The properties of VKP-11 conductive adhesive are given. The influence of carbonyl nickel content, as well as the technological modes of gluing (bonding; temperature and pressure), on the electrically conductive properties of adhesives, is shown. It has been found that the use of carbonyl nickel powder in the composition of adhesives makes it possible to ensure the value of ρν at the level of 10–2 Ω m. This level of electrical conductivity is sufficient to solve the problem of removing static electricity. Information is given on the change in the properties of adhesive joints under the influence of operational factors, as well as during the exposure of adhesive joints in various climatic zones. © 2023, Pleiades Publishing, Ltd.
引用
收藏
页码：9 / 13
页数：4
相关论文
共 50 条
  • [1] Preparation of Electrically Conductive Filler for Anisotropic Conductive Adhesive附视频
    华丽
    安兵
    吴懿平
    吴丰顺
    王佳
    何敬强
    上海交通大学学报, 2007, (S2) : 127 - 130+138
  • [2] Hybrid Electrically Conductive Adhesive (HECA) Properties as a Function of Hybrid Filler Ratio with Increasing Total Filler Loading
    Z. Adnan
    S. H. S. M. Fadzullah
    G. Omar
    Z. Mustafa
    M. B. Ramli
    N. Razali
    A. A. Kamarolzaman
    Electronic Materials Letters, 2021, 17 : 369 - 383
  • [3] Hybrid Electrically Conductive Adhesive (HECA) Properties as a Function of Hybrid Filler Ratio with Increasing Total Filler Loading
    Adnan, Z.
    Fadzullah, S. H. S. M.
    Omar, G.
    Mustafa, Z.
    Ramli, M. B.
    Razali, N.
    Kamarolzaman, A. A.
    ELECTRONIC MATERIALS LETTERS, 2021, 17 (04) : 369 - 383
  • [4] Evaluation of bismuth as a filler material for anisotropically conductive adhesive
    Vuorela, M
    Kivilahti, JK
    POLYTRONIC 2001, PROCEEDINGS, 2001, : 202 - 202
  • [5] Preparation of nickel coated mica as a conductive filler
    Jiang, G
    Gilbert, M
    Hitt, DJ
    Wilcox, GD
    Balasubramanian, K
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (05) : 745 - 751
  • [6] Effect of Carbon Filler and Ester Type Binder on the Reactivity and Adhesive Properties with PET Film of Conductive Paste
    Ku, Hyo Sun
    Shim, Chang Up
    Kim, Youn Cheol
    APPLIED CHEMISTRY FOR ENGINEERING, 2022, 33 (04): : 381 - 385
  • [7] The effect of conductive filler on the properties of electrically conductive adhesives(ECAs)
    Hao, Jian
    Wang, Dapeng
    Li, Saipeng
    He, Xinyue
    Zhou, Jian
    Xue, Feng
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 803 - 808
  • [8] The interrelationships between electronically conductive adhesive formulations, substrate and filler surface properties, and joint performance. Part I: the effects of adhesive thickness
    Gomatam, RR
    Sancaktar, E
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2004, 18 (11) : 1225 - 1243
  • [9] The interrelationships between electronically conductive adhesive formulations, substrate and filler surface properties, and joint performance. Part I: The effects of adhesive thickness
    Gomatam, Rajesh R.
    Sancaktar, Erol
    1600, Taylor and Francis Ltd. (18):
  • [10] The interrelationships between electronically conductive adhesive formulations, substrate and filler surface properties, and joint performance. Part I: The effects of adhesive thickness
    Sancaktar, E. (erol@uakron.edu), 1600, VSP BV (18):
12345