Insights of water vapor sorption onto polymer based sorbents

被引：0

作者：

Muhammad Sultan

Ibrahim I. El-Sharkawy

Takahiko Miyazaki

Bidyut B. Saha

Shigeru Koyama

Tomohiro Maruyama

Shinnosuke Maeda

Takashi Nakamura

机构：

[1] Kyushu University,Interdisciplinary Graduate School of Engineering Sciences

[2] Kyushu University,Faculty of Engineering Sciences

[3] Mansoura University,Mechanical Power Engineering Department, Faculty of Engineering

[4] Kyushu University,International Institute for Carbon

[5] Calsonic Kansei Corporation,Neutral Energy Research (WPI

来源：

Adsorption | 2015年 / 21卷

关键词：

Adsorption isotherm; Water vapor; Polymer; Adsorption models;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Two polymer based sorbents PS-I and PS-II are analyzed for water sorption applications. Adsorption/desorption isotherms of water vapor onto PS-I and PS-II have been experimentally measured using a magnetic suspension adsorption measurement unit for adsorber temperature ranges 20–80 °C and evaporator temperature ranges 2–73 °C. The equilibrium adsorption uptake of water vapors corresponding to saturation condition at 30 °C by PS-I and PS-II was found nearly 2 and 2.5 times higher than the conventional silica-gel, respectively. Adsorption data has been analyzed for various adsorption models which include Brunauer–Emmett–Teller (BET); Freundlich; Dubinin–Astakhov (D–A); Oswin; and Guggenheim–Anderson–de Boer (GAB) model. The GAB and BET model give the good fit for relative pressure range of 0.10–0.90 and 0.05–0.35, respectively. At all adsorption temperatures of both sorbents, the monolayer uptake by the GAB model is found higher than the BET model. Effect of adsorption potential on adsorption uptake is highlighted in relation with water vapor adsorption mechanism. The isosteric heat of water vapor adsorption is determined for both sorbents using Clausius–Clapeyron equation.

引用

页码：205 / 215

页数：10