Minimum entropy generation for laminar flow at constant wall temperature in a circular duct for optimum design

被引：0
作者：
Alper Yilmaz
机构：
[1] University of Çukurova,Department of Mechanical Engineering, Faculty of Engineering and Architecture
来源：
Heat and Mass Transfer | 2009年 / 45卷
关键词：
Pressure Loss; Entropy Generation; Total Pressure Loss; Entropy Generation Rate; Constant Wall Temperature;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Entropy generation for hydrodynamically and thermally developing laminar flow in a circular duct at constant wall temperature is investigated. Optimum temperature difference between fluid inlet temperature and wall temperature is determined for minimum entropy generation rate. An equation for optimum temperature difference at minimum entropy generation rate is given. It is seen that the optimum dimensionless temperature difference is a finite value for a duct length approaching zero for low temperature differences. It is possible to calculate the optimum pressure loss for given wall and inlet fluid temperature differences and corresponding optimum dimensions of a circular duct can be determined with these results. An example for the dimensioning of an air-conditioning heat exchanger tube for given wall and air inlet temperatures and heat transferred is presented.
引用
收藏
页码：1415 / 1421
页数：6
相关论文
共 50 条
[41]   Effect of non-uniform heating on entropy generation for the laminar developing pipe flow of a high Prandtl number fluid [J].
Esfahani, J. A. ;
Shahabi, P. B. .
ENERGY CONVERSION AND MANAGEMENT, 2010, 51 (11) :2087-2097
[42]   Effect of Magnetic field on Entropy Generation due to Micropolar Fluid Flow in a Rectangular duct [J].
Srinivasacharya, D. ;
Bindu, K. Hima .
INTERNATIONAL CONFERENCE ON COMPUTATIONAL HEAT AND MASS TRANSFER (ICCHMT) - 2015, 2015, 127 :1150-1157
[43]   Heat Transfer and Entropy Generation of Non-Newtonian Laminar Flow in Microchannels with Four Flow Control Structures [J].
Yang, Ke ;
Zhang, Di ;
Xie, Yonghui ;
Xie, Gongnan .
ENTROPY, 2016, 18 (08)
[44]   Exergy transfer characteristics of forced convective heat transfer through a duct with constant wall temperature [J].
Wu, Shuang-Ying ;
Li, You-Rong ;
Chen, Yan ;
Xiao, Lan .
ENERGY, 2007, 32 (12) :2385-2395
[45]   The research on exergy transfer of forced convective heat transfer through a duct with constant wall temperature [J].
Wu, Shuang-ying ;
Chen, Yan ;
Li, You-rong ;
Zeng, Dan-ling .
HT2005: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE 2005, VOL 4, 2005, :325-330
[46]   Entropy Generation Minimization for the Optimal Design of the Fluid Distribution System in a Circular MCFC [J].
Sciacovelli, A. ;
Verda, V. .
INTERNATIONAL JOURNAL OF THERMODYNAMICS, 2011, 14 (04) :167-177
[47]   Heat Transfer Enhancement and Entropy Generation of Nanofluids Laminar Convection in Microchannels with Flow Control Devices [J].
Li, Ping ;
Xie, Yonghui ;
Zhang, Di ;
Xie, Gongnan .
ENTROPY, 2016, 18 (04)
[48]   Heat transfer and entropy generation of laminar mixed convection in an inclined lid driven enclosure with a circular porous cylinder [J].
Taghizadeh, Salar ;
Asaditaheri, Azin .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2018, 134 :242-257
[49]   Design and optimization on symmetrical wing longitudinal swirl generators in circular tube for laminar flow [J].
Wang, Yongji ;
Liu, Peng ;
Xiao, Hui ;
Liu, Zhichun ;
Liu, Wei .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 193
[50]   Theoretical Investigation of Entropy Generation in Axisymmetric Stagnation Point Flow of Nanofluid Impinging on the Cylinder Axes with Constant Wall Heat Flux and Uniform Transpiration [J].
Zahmatkesh, Reza ;
Mohammadiun, Hamid ;
Mohammadiun, Mohammad ;
Bonab, Dibaee ;
Hossein, Mohammad ;
Sadi, Meisa .
IRANIAN JOURNAL OF CHEMISTRY & CHEMICAL ENGINEERING-INTERNATIONAL ENGLISH EDITION, 2021, 40 (06) :1893-1908
12345