Use of Carbonatites in the Production of Precipitated Calcium Carbonate: A Case Study from Eppawala, Sri Lanka

被引：1

作者：

Madugalla T.B.N.S. ^{[1
]}

Pitawala H.M.T.G.A. ^{[1
]}

Karunaratne D.G.G.P. ^{[2
]}

机构：

[1] Department of Geology, University of Peradeniya, Peradeniya

[2] Department of Chemical and Process Engineering, University of Peradeniya, Peradeniya

来源：

Natural Resources Research | 2014年 / 23卷 / 2期

关键词：

calcite; carbonatites; Eppawala; precipitated calcium carbonate; Synthesis;

D O I：

10.1007/s11053-013-9222-8

中图分类号：

学科分类号：

摘要：

The study investigates the possibility of using carbonatite in the production of precipitated calcium carbonate (PCC). We made use of fresh apatite-rich carbonatites found at the phosphate mining sites at Eppawala, Sri Lanka. Analyses of the fresh carbonatite were performed with the aid of optical microscopy, powder X-ray diffraction (XRD), atomic absorption spectrophotometry (AAS), UV/visible spectrophotometry (UVVS), and thermo gravimetric analysis (TGA). Quicklime obtained from calcinations of carbonatites was used in synthesizing PCC via a lime-soda process. The end product was analyzed with XRD, TGA, AAS, and UVVS. Results revealed that the most common CO3 2- phase available in fresh carbonatites is calcite (>65%). The Ca-rich CO3 2- phase can be distinguished easily from other available minerals because its mode of occurrence in carbonatite matrix is different to that of other minerals. The results of TGA show that the decomposition of CO3 2- phase initiates at about 340°C, which leads to lower energy consumption during calcinations. Post-magmatic hydrothermal process may have been the cause of the formation of thermally unstable CO3 2- phases. Hydration of quicklime from the carbonatite yields much higher Ca2+ in the solution than from marble under the same experimental conditions. The synthesized PCC particles are in the calcite polymorphic form. The purity of PCC varies from 96 to 98 wt%. The maximum precipitable CaCO3 from 1 g of quicklime is about 1.1 g. Hence, fresh carbonatites has great economic potential for the production of PCC. © 2013 International Association for Mathematical Geology.

引用

页码：217 / 229

页数：12

共 77 条

[1]

Altay E., Shahwan T., Tanoglu M., Morphosynthesis of CaCO3 at different reaction temperatures and the effects of PDDA, CTAB, and EDTA on the particle morphology and polymorph stability, Powder Technology, 178, pp. 194-202, (2007)

[2]

Bandi W.R., Krapf G., The effect of CO2 pressure and alkali salt on the mechanism of decomposition of dolomite, Thermochimica Acta, 14, 1-2, pp. 221-243, (1976)

[3]

Belgachem K., Llewellyn P., Nahdia K., Ayadi M.T., Thermal behavior study of the talc, Journal of Optoelectronics and Advanced Materials-Rapid Communications, 2, 6, pp. 332-336, (2008)

[4]

Beruto D.T., Vecchiattini R., Giordani M., Solid products and rate-limiting step in the thermal half decomposition of natural dolomite in a CO2(g) atmosphere, Thermochimica Acta, 405, pp. 183-194, (2003)

[5]

Beruto D.T., Vecchiattini R., Giordani M., Effect of mixtures of H2O(g) and CO2(g) on the thermal half decomposition of dolomite natural stone in high CO2 pressure regime, Thermochimica Acta, 404, pp. 25-33, (2003)

[6]

Bose K., Gangully J., Thermogravimetric study of the dehydration kinetics of talc, American Mineralogist, 79, pp. 692-699, (1994)

[7]

Castor S.B., Hedrick J.B., Rare earth elements, Industrial Minerals & Rocks: Commodities, Markets, and Uses, pp. 769-792, (2006)

[8]

Chang L.L.Y., Howie R.A., Zussman J., Non-silicates: Sulfates, carbonates, phosphates, halides, Rock forming minerals, 5 B, pp. 189-218, (1996)

[9]

Chudy T.C., Groat L.A., The origin of the tantalum-bearing upper fir carbonatite, east-central British Columbia, Canada: Preliminary results, Acta Mineralogica Petrographica Abstract Series, Szeged, pp. 6-566, (2010)

[10]

Crowley M.S., Roy R., Crystalline solubility in the muscovite and phlogopite groups, American Mineralogist, 49, pp. 348-362, (1964)

← 1 2 3 4 5 6 7 8 →