A novel method for the strain strengthening of metastable austenitic stainless steel dome by deep cryogenic forming

被引:0
作者
Cheng, Wangjun [1 ,2 ]
Zeng, Yue [1 ]
Cui, Dongdong [1 ]
Sun, Yaoning [1 ]
Man, Jiao [1 ]
机构
[1] Xinjiang Univ, Sch Mech Engn, Urumqi 830017, Peoples R China
[2] Xinjiang Univ, Postdoctoral Res Stn Mech Engn, Urumqi 830017, Peoples R China
基金
中国国家自然科学基金; 中国博士后科学基金;
关键词
Metastable austenitic stainless steel; Bulging dome; Strain strengthening; Deep cryogenic forming; TEXTURE EVOLUTION; TEMPERATURE; BEHAVIOR;
D O I
10.1007/s43452-024-00924-7
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
To enhance the strength of metastable austenitic stainless steel (ASS) sheet components, a novel method was proposed for the strengthening of a metastable ASS dome by a newly designed bulging device under deep cryogenic conditions. The load curves, Vickers microhardness, thickness distribution, and deformation law of formed dome components at room temperature (RT) and cryogenic temperature (CT) were discussed in detail. The strengthening mechanism of metastable ASS domes was elucidated by phase transformation, and the evolutions of grain boundary and dislocation at RT and CT, respectively. It is found that the strength of metastable ASS domes at CT increases with increasing strain. The strengthening effect of the metastable ASS sheet under biaxial stress state is significantly enhanced. Less martensite is generated at a low plastic strain, and the stability of the austenite phase is noticeably decreased under a large strain at CT. The dislocation distribution at RT is relatively uniform and is not accumulated at grain boundaries, while numerous dislocations at CT are apparently distributed near grain boundaries. The forming of metastable ASS domes at deep cryogenic temperatures is accommodated by both dislocation slip and martensitic transformation. Hence, the strength of metastable ASS thin-walled domes is significantly improved.Graphical Abstract(1) A novel method was proposed for the strengthening of metastable austenitic stainless steel (ASS) sheet by a newly-designed bulging device under deep cryogenic conditions. (2) Based on the quasi-in situ EBSD observations, the strengthening mechanism of metastable ASS domes was elucidated by microstructural phase transformation, and the evolutions of grain boundary and dislocation at room temperature (RT) and cryogenic temperature (CT). (3) Under the condition of low temperature biaxial stress, the strengthening effect of the metastable ASS sheet is significantly enhanced. Compared to RT, the maximum force increases from 105 to 182 kN at CT. The Vickers hardness increases to 393 HV at CT for the 20 mm dome, which is 38.9% higher than that at RT. (4) The stability of the austenite phase at a large plastic strain is noticeably decreased at CT. Martensitic transformation induced by a great strain is drastic. (5) The forming of metastable ASS domes at low cryogenic temperatures is microstructurally accommodated by dislocation slip and martensitic transformation.
引用
收藏
页数:15
相关论文
共 30 条
  • [1] A crystal plasticity model that accounts for grain size effects and slip system interactions on the deformation of austenitic stainless steels
    Agius, Dylan
    Kareer, Anna
    Al Mamun, Abdullah
    Truman, Christopher
    Collins, David M.
    Mostafavi, Mahmoud
    Knowles, David
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2022, 152
  • [2] [Anonymous], 2014, Proc Mater Sci, DOI DOI 10.1016/J.MSPRO.2014.07.013
  • [3] Enhanced mechanical and anticorrosion properties in cryogenic friction stir processed duplex stainless steel
    Cao, Fujun
    Sun, Tao
    Hu, Jinpeng
    Hou, Wentao
    Huang, Guoqiang
    Shen, Yifu
    Ma, Ninshu
    Geng, Peihao
    Hu, Weiye
    Qu, Xiaoyang
    [J]. MATERIALS & DESIGN, 2023, 225
  • [4] EBSD study of grain growth behavior and annealing twin evolution after full recrystallization in a nickel-based superalloy
    Chen, Xiao-Min
    Lin, Y. C.
    Wu, Fan
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 724 : 198 - 207
  • [5] Cryogenic work-hardening behavior for a metastable austenitic stainless steel at liquid nitrogen temperature
    Cheng, Wangjun
    Cui, Dongdong
    Sun, Yaoning
    Liu, Wei
    Xu, Yifei
    Liu, Bin
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 861
  • [6] A modified stress-strain relation for austenitic stainless steels at cryogenic temperatures
    Ding, Huiming
    Wu, Yingzhe
    Lu, Qunjie
    Wang, Yibo
    Zheng, Jinyang
    Xu, Ping
    [J]. CRYOGENICS, 2019, 101 : 89 - 100
  • [7] Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet
    Hassan, M. A.
    Saleh, M. A. E.
    Takakura, N.
    Ramesh, S.
    Purbolaksono, J.
    [J]. MATERIALS & DESIGN, 2012, 42 : 37 - 45
  • [8] Low temperature plasticity of microcrystalline Al-Li alloy
    Hryhorova, T.
    Isaev, N.
    Shumilin, S.
    Zabrodin, P.
    Drozdenko, D.
    Fekete, K.
    Davydenko, O.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 864
  • [9] Dynamic restoration of the ferrite and austenite phases during hot compressive deformation of a lean duplex stainless steel
    Khatami-Hamedani, H.
    Zarei-Hanzaki, A.
    Abedi, H. R.
    Anoushe, A. S.
    Karjalainen, L. P.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 788
  • [10] Tensile properties and deformation behavior of ferrite and austenite duplex stainless steel at cryogenic temperatures
    Koga, Norimitsu
    Nameki, Tatsuya
    Umezawa, Osamu
    Tschan, Valentin
    Weiss, Klaus-Peter
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 801