Modified sol-gel synthesis of ultradispersed powders of cobalt, nickel, molybdenum, and tungsten oxides and composites based on them

被引：2

作者：

Trusova E.A. ^{[1
]}

Kotsareva K.V. ^{[1
]}

Shelekhov E.V. ^{[1
]}

Kutsev S.V. ^{[1
]}

机构：

[1] Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow, 119991

来源：

Nanotechnologies in Russia | 2014年 / 9卷 / 05期

基金：

俄罗斯基础研究基金会;

关键词：

Heat treatment;

D O I：

10.1134/S1995078014030161

中图分类号：

学科分类号：

摘要：

An approach is proposed to the creation of laboratory technology of ultradispersed VI and VIII groups metal oxide powders, as well as composites based on them, intended to provide a broad range of fine-grained ceramics. The study covers the modified sol-gel synthesis of cobalt, nickel, tungsten, and molybdenum oxides powders and composites based on them by MeVIIIMeVIOx-type having a particle size of 10 to 1000 nm. The influence of the reaction mixture composition on the phase composition of such binary systems was shown. The conditions of obtaining of metal oxide powders with certain dispersions were investigated: the molar ratio stabilizer/metal, thermal treatment mode, etc. The effect of various sol stabilizers, hexamethylenetetramine, N,N-dimethyloctylamine, and tetraethylammonium hydroxide, on the dispersity of metal oxide powders was shown. All synthesized powders have been characterized using instrumental methods: X-ray diffraction, transmission electron microscopy, N2 adsorption-desorption, and a laser confocal microscope. The optimal parameters of modified sol-gel synthesis of ultradispersed powders have been determined: the qualitative and quantitative compositions of the reaction mixture, thermal treatment, etc. The developed approach allows to synthesize ultradispersed metal oxide particles with a given size and vary it within 10-130 nm range with a precision of 20-30 nm. © 2014 Pleiades Publishing, Ltd.

引用

页码：325 / 338

页数：13

共 18 条

[1] Alymov M.I., Powder Metallurgy for Nanocrystalline Materials, (2007)
[2] Buler P., Nanothermodynamics, (2004)
[3] Chow G.-M., Urbanovich V.S., Noskova N.I., Nanostructured Materials Science and Technology, (1998)
[4] Xiang L., Deng X.Y., Jin Y., Experimental study on synthesis of NiO nano-particles, Scripta Mater., 47, pp. 219-224, (2002)
[5] Pejova B., Kocareva T., Najdoski M., Grozdanov I., A solution growth route to nanocrystalline nickel oxide thin films, Appl. Surf. Sci., 165, pp. 271-278, (2000)
[6] Parmon V.N., Duplyakin V.K., Russian oil-processing industry by example of catalysis. State of the art and problems, Kataliz Neftepererabat. Prom., No. 2, pp. 3-10, (2003)
[7] Kaminskii E.F., Khavkin V.A., Deep Oil Processing: Technological and Ecological Aspects, (2001)
[8] Monk P., Mortimer R., Rosseinsky D., Electrochromism and Electrochromic Devices, (2007)
[9] Xu C., Hong K., Liu S., Wang G., Zhao X., A novel wet chemical route to NiO nanowires, J. Cryst. Growth, 255, pp. 308-312, (2003)
[10] Principles of Nanotechnology-Molecular-Based Study of Condensed Matter in Small Systems (World Sci.)

← 1 2 →