Eco-sustainable routing of power lines for the connection of renewable energy plants to the Italian high-voltage grid

被引：13

作者：

Araneo R. ^{[1
]}

Celozzi S. ^{[1
]}

Vergine C. ^{[2
]}

机构：

[1] DIAEE, Electrical Engineering Division, University of Rome “La Sapienza”, Rome

[2] National Transmission Network, Terna S.p.A., Rome

来源：

International Journal of Energy and Environmental Engineering | 2015年 / 6卷 / 1期

关键词：

Connection assessment; Distributed generation; Overhead power lines; Wind farm;

D O I：

10.1007/s40095-014-0143-z

中图分类号：

学科分类号：

摘要：

Routing of high-voltage electric transmission lines for the connection of renewable energy-distributed generation plants is a critical issue from an environmental point of view. A standard methodology that accounts for multiple perspectives, influence factors and is able to mediate between weighted constraints can be a useful tool for the regulating bodies that are involved in approval processes. The methodology can be an effective support to increase reliability, save consumers' money and mitigate the unavoidable impacts of the lines on the population living nearby. In this paper we investigate the suitability of a procedure employed by Terna, the Italian high-voltage transmission system operator, to identify the corridors where to route new overhead transmission lines with the lowest environmental impact. The methodology is based on the subdivision of all the relevant constraints dictated by environmental issues and territory legislations in four main classes. A real case study concerning the design and connection of a wind farm placed near Collarmele, in the center of Italy, shows the effectiveness of the proposed methodology. © 2014, The Author(s).

引用

页码：9 / 19

页数：10

共 35 条

[1]

Abam F., Nwankwojike B.N., Ohunakin O.S., Ojomu S.A., Energy resource structure and on-going sustainable development policy in Nigeria: a review, Int. J. Energy Environ. Eng., 5, 2, pp. 1-16, (2014)

[2]

Adaramola M., Oyewola O., Evaluating the performance of wind turbines in selected locations in Oyo state, Nigeria, Renew. Energy, 36, 12, pp. 3297-3304, (2011)

[3]

Araneo R., Falconi C., Lateral bending of tapered piezo-semiconductive nanostructures for ultra-sensitive mechanical force to voltage conversion, Nanotechnology, 24, 26, (2013)

[4]

Araneo R., Grasselli U., Celozzi S., Assessment of a practical model to estimate the cell temperature of a photovoltaic module, Int. J. Energy Environ. Eng., 5, pp. 1-15, (2014)

[5]

Araneo R., Lammens S., Grossi M., Bertone S., EMC issues in high-power grid-connected photovoltaic plants, IEEE Trans. Electromagn. Compat., 51, pp. 639-648, (2009)

[6]

Araneo R., Lovat G., Burghignoli P., Falconi C., Piezo-semiconductive quasi-1D nanodevices with or without anti-symmetry, Adv. Mater., 24, 34, pp. 4719-4724, (2012)

[7]

Araneo R., Bini F., Pea M., Notargiacomo A., Rinaldi A., Lovat G., Celozzi S., Current-voltage characteristics of ZnO nanowires under uniaxial loading, IEEE Trans. Nanotechnol, 13, 4, (2014)

[8]

Celozzi S., Active compensation and partial shields for the power-frequency magnetic field reduction, IEEE Int. Symp. Electromag. Compat., 1, pp. 222-226, (2002)

[9]

Celozzi S., Garzia F., Magnetic field reduction by means of active shielding techniques, Sustain. World, 8, pp. 79-89, (2003)

[10]

Celozzi S., Garzia F., Active shielding for power-frequency magnetic field reduction using genetic algorithms optimisation, IEEE Proc. Sci. Meas. Technol., 151, 1, pp. 2-7, (2004)

← 1 2 3 4 →