共 167 条
[1]
Baqersad J(2017)Photogrammetry and optical methods in structural dynamics—A review Mech. Syst. Signal Process. 86 17-34
[2]
Poozesh P(2019)Geometrical metrology for metal additive manufacturing J. CIRP Ann. 68 677-700
[3]
Niezrecki C(2016)Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing Mater. Des. 95 431-445
[4]
Avitabile P(2018)Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals Meas. Sci. Technol. 29 4-12
[5]
Leach R(2007)In situ nanoscale in-plane deformation studies of ultrathin polymeric films during tensile deformation using atomic force microscopy and digital image correlation techniques IEEE Trans. Nanotechnol. 6 819-831
[6]
Everton SK(2016)Full-field dynamic strain on wind turbine blade using digital image correlation techniques and limited sets of measured data from photogrammetric targets Exp. Tech. 40 123-132
[7]
Hirsch M(1993)Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision Exp. Mech. 33 282-291
[8]
Stravroulakis P(2009)3-D computer vision in experimental mechanics Opt. Lasers Eng. 47 6-18
[9]
Leach RK(2019)An omnidirectional DIC system for dynamic strain measurement on soft biological tissues and organs Opt. Lasers Eng. 116 3418-3427
[10]
Clare AT(2010)Three-dimensional digital image correlation technique using single high-speed camera for measuring large out-of-plane displacements at high framing rates Appl. Opt. 49 25056-25068