Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys

被引：0
作者：
Ming Liu
Peter J. Uggowitzer
Patrik Schmutz
Andrej Atrens
机构：
[1] The University of Queensland,Division of Materials, ARC CoE for Design in Light Metals
[2] Swiss Federal Laboratories for Materials Science and Technology,Department of Materials
[3] Swiss Federal Laboratories for Materials Science and Technology in Dubendorf,undefined
[4] ETH Zurich,undefined
来源：
JOM | 2008年 / 60卷
关键词：
Corrosion Rate; Magnesium Alloy; Stress Corrosion Crack; Tolerance Limit; Salt Spray;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The factors determining corrosion are reviewed in this paper, with an emphasis on iron tolerance limit and the production of high-purity castings. To understand the iron impurity tolerance limit, magnesium phase diagrams were calculated using the Pandat software package. Calculated phase diagrams can explain the iron tolerance limit and the production of high-purity castings by means of control of melt conditions; this is significant for the production of quality castings from recycled magnesium. Based on the new insight, the influence of the microstructure on corrosion of magnesium alloys is reviewed.
引用
收藏
页码：39 / 44
页数：5
相关论文
共 50 条
[31]   Influence of the solute concentration on the anelasticity in Mg-Al alloys: A multiple-approach study [J].
Drozdenko, Daria ;
Capek, Jan ;
Clausen, Bjorn ;
Vinogradov, Alexei ;
Mathis, Kristian .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 786 :779-790
[32]   Assessing the Corrosion of Multi-Phase Mg-Al Alloys with High Al Content by Electrochemical Impedance, Mass Loss, Hydrogen Collection, and Inductively Coupled Plasma Optical Emission Spectrometry Solution Analysis [J].
Bland, Leslie G. ;
Scully, L. C. ;
Scully, J. R. .
CORROSION, 2017, 73 (05) :526-543
[33]   Measuring and Modeling Microsegregation in High-Pressure Die Cast Mg-Al Alloys [J].
Berman, Tracy D. ;
Yao, Zhenjie ;
Deda, Erin ;
Godlewski, Larry ;
Li, Mei ;
Allison, John E. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2022, 53 (07) :2730-2742
[34]   Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys [J].
Chino, Yasumasa ;
Ueda, Takamichi ;
Otomatsu, Yuki ;
Sassa, Kensuke ;
Huang, Xinsheng ;
Suzuki, Kazutaka ;
Mabuchi, Mamoru .
MATERIALS TRANSACTIONS, 2011, 52 (07) :1477-1482
[35]   Microstructure and texture characterization of Mg-Al and Mg-Gd binary alloys processed by simple shear extrusion [J].
Tork, N. Bayat ;
Saghafian, H. ;
Razavi, S. H. ;
Al-Fadhalah, K. J. ;
Ebrahimi, R. ;
Mahmudi, R. .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (01) :1288-1299
[36]   Deformation induced solute segregation and GP zone formation in Mg-Al and Mg-Zn binary alloys [J].
Sasaki, T. T. ;
Lin, J. Y. ;
Yi, P. ;
Li, Z. H. ;
Prameela, S. E. ;
Park, A. ;
Lipkin, E. ;
Lee, A. ;
Falk, M. L. ;
Weihs, T. P. ;
Hono, K. .
SCRIPTA MATERIALIA, 2022, 220
[37]   Electrochemical corrosion behavior of Mg-Al-Sn alloys with different morphologies of β-Mg17Al12 phase as the anodes for Mg-air batteries [J].
Wang, Wan ;
Liu, Jingjing ;
Chen, Jinpeng ;
Zhang, Weicheng ;
Li, Chuanqiang ;
Shi, Zhicong ;
Wang, Naiguang .
ELECTROCHIMICA ACTA, 2023, 470
[38]   Corrosion resistance of anodised single-phase Mg alloys [J].
Shi, Zhiming ;
Song, Guangling ;
Atrens, Andrej .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (1-2) :492-503
[39]   A novel fabrication method of surface-porous Mg-Al alloy and its corrosion property [J].
Wu, Peng-Peng ;
Zhu, Yi-Xing ;
Feng, Zhen-Liang ;
Song, Guang-Ling ;
Zheng, Da-Jiang .
MATERIALS TODAY COMMUNICATIONS, 2021, 27
[40]   The effects of a corrosion product film on the corrosion behavior of Mg-Al alloy with micro-alloying of yttrium in a chloride solution [J].
Yang, Yao ;
Cao, Sijun ;
Ying, Tao ;
Cao, Fuyong ;
Wang, Jingya ;
Zhu, Qingchun ;
Zeng, Xiaoqin .
CORROSION COMMUNICATIONS, 2023, 11 :12-22
12345