Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys

被引：0
作者：
Ming Liu
Peter J. Uggowitzer
Patrik Schmutz
Andrej Atrens
机构：
[1] The University of Queensland,Division of Materials, ARC CoE for Design in Light Metals
[2] Swiss Federal Laboratories for Materials Science and Technology,Department of Materials
[3] Swiss Federal Laboratories for Materials Science and Technology in Dubendorf,undefined
[4] ETH Zurich,undefined
来源：
JOM | 2008年 / 60卷
关键词：
Corrosion Rate; Magnesium Alloy; Stress Corrosion Crack; Tolerance Limit; Salt Spray;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The factors determining corrosion are reviewed in this paper, with an emphasis on iron tolerance limit and the production of high-purity castings. To understand the iron impurity tolerance limit, magnesium phase diagrams were calculated using the Pandat software package. Calculated phase diagrams can explain the iron tolerance limit and the production of high-purity castings by means of control of melt conditions; this is significant for the production of quality castings from recycled magnesium. Based on the new insight, the influence of the microstructure on corrosion of magnesium alloys is reviewed.
引用
收藏
页码：39 / 44
页数：5
相关论文
共 50 条
  • [21] Effect of Al- and Ce-content on Microstructure of Mg-Al Magnesium Alloys
    Cheng R.
    Dong H.
    Liu W.
    Jiang B.
    Xiong S.
    Liu B.
    Pan F.
    Dong, Hanwu (donghanwu465@163.com), 1600, Chinese Journal of Materials Research (31): : 737 - 742
  • [22] FORMATION AND CORROSION RESISTANCE OF Mg-Al HYDROTALCITE FILM ON Mg-Gd-Zn ALLOY
    Ba, Z. X.
    Dong, Q. S.
    Kong, S. X.
    Zhang, X. B.
    Xue, Y. J.
    Chen, Y. J.
    SURFACE REVIEW AND LETTERS, 2017, 24 (01)
  • [23] Iron Content in Relationship with Alloying Elements and Corrosion Behaviour of Mg3Al Alloys
    Ha Ngoc Nguyen
    Kim, Jong Ii
    Kim, Young Min
    You, Bong Sun
    MAGNESIUM TECHNOLOGY 2019, 2019, : 145 - 150
  • [24] Synthesis of Mg-Al Alloys by Bulk Mechanical Alloying (BMA) and Their Hydrogen Solubility
    Nobuki, Tohru
    Crivello, Jean-Claude
    Kuji, Toshiro
    MATERIALS TRANSACTIONS, 2008, 49 (11) : 2679 - 2685
  • [25] Synthesis of Mg-Al alloys by bulk mechanical alloying (BMA) and their hydrogen solubility
    Nobuki, Tohru
    Crivello, Jean-Claude
    Kuji, Toshiro
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2007, 71 (08) : 592 - 597
  • [26] Aluminium-Rich Coring Structures in Mg-Al Alloys with Carbon Inoculation
    Huang, Yuanding
    Zheng, Xiuhua
    Okechukwu, Anopuo
    Kim, Gyu Seok
    Kainer, Karl Ulrich
    Hort, Norbert
    PRICM 7, PTS 1-3, 2010, 654-656 : 675 - +
  • [27] The Effect of Solidification Dynamics on the Formation of the Skin in Die Cast Mg-Al and Mg-RE Alloys
    Yang, Kun Vanna
    Easton, Mark A.
    Caceres, Carlos H.
    ADVANCED ENGINEERING MATERIALS, 2013, 15 (04) : 302 - 307
  • [28] Intercalation of Y in Mg-Al layered double hydroxide films on anodized AZ31 and Mg-Y alloys to influence corrosion protective performance
    Dai, Xu
    Wu, Liang
    Xia, Yu
    Chen, Yanning
    Zhang, You
    Bin Jiang
    Xie, Zhihui
    Ci, Wenjun
    Zhang, Gen
    Pan, Fusheng
    APPLIED SURFACE SCIENCE, 2021, 551
  • [29] Corrosion behaviour of Mg/Al alloys in high humidity atmospheres
    Arrabal, R.
    Pardo, A.
    Merino, M. C.
    Merino, S.
    Mohedano, M.
    Casajus, P.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2011, 62 (04): : 326 - 334
  • [30] Corrosion resistance of Mg-5Al-xSr alloys
    Nam, N. D.
    Kim, W. C.
    Kim, J. G.
    Shin, K. S.
    Jung, H. C.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (14) : 4839 - 4847
12345