Effect of maleic anhydride grafted styrene-ethylene-butylene-styrene (MA-SEBS) on impact fracture behavior of polypropylene / wood fiber composites

被引：4

作者：

Guo C.-G. ^{[1
,2
]}

Wang Q.-W. ^{[1
,2
]}

机构：

[1] MOE Key Laboratory of Bio-based Material Science and Technology, Northeast Forestry University

[2] Northeast Forestry University

来源：

Journal of Forestry Research | 2007年 / 18卷 / 3期

关键词：

Fracture behavior; Impact test; Polypropylene; Wood fiber/polypropylene composites;

D O I：

10.1007/s11676-007-0041-9

中图分类号：

学科分类号：

摘要：

MA-SEBS as compatibilizer and impact modifier was incorporated into Polypropylene/Wood Fiber (PP/WF) to enhance interface adhesion and impact strength of the composite. The effect of MA-SEBS content on the impact fracture behavior of PP/WF composites was studied. The impact properties of composites with 8% MA-SEBS reached the maximum value. And further increasing of MA-SEBS content to 10% did not improve the fracture toughness, but improved the stiffness of composites by DMA analysis. This was attributed to the improved PP/WF adhesion. As the MA-SEBS content is more than 8%, the molecule interaction of PP and WF was expected to much stronger than lower MA-SEBS. Scanning electron microscopy (SEM) was performed to analyze the impact fracture surface and showed a stronger affinity for the wood surfaces. © 2007 Northeast Forestry University and Springer-Verlag.

引用

页码：203 / 207

页数：4

共 11 条

[1]

Broberg K.B., Crack-growth criteria non-linear fracture mechanics, J. Mech. Phys. Solids., 19, pp. 407-418, (1971)

[2]

Fasce L., Bernal C., Frontini P., Et al., On the impact essential work of fracture of ductile polymers, Polym. Eng. Sci., 41, pp. 1-4, (2001)

[3]

Hristov V.N., Krumova M., Vasileva S., Modified polypropylene wood Flour composites. II. Fracture, deformation, and mechanical properties, J. Appl.Polym. Sci., 92, pp. 1286-1292, (2004)

[4]

Hristov V.N., Lach R., Grellmann W., Impact fracture behavior of modified polypropylene/wood fiber composites, Polym.Test., 23, pp. 581-589, (2004)

[5]

Paul D.R., Bucknall C.B., Polymer Composites Performance, pp. 177-185, (2000)

[6]

Qiu W.L., Zhang F.R., Endo T., Et al., Effect of maleated polypropylene on the performance of polypropylene/cellulose composite, Polym. Compos., 26, pp. 448-452, (2005)

[7]

Sui G.X., Wong S.C., Yue C.Y., The effect of fiber inclusions in toughened plastics-part I: Fracture characterization by essential fracture work, Compos. Sci. Technol., 61, pp. 2481-2486, (2001)

[8]

Tjong S.C., Xu S.A., Li R.-Y., Et al., Mechanical behavior and fracture evaluation of maleix anhydride compatibilized short glass fiber/SEBS/polypropylene hybrid composites, Compos. Sci. Technol., 62, pp. 831-837, (2002)

[9]

Williams J.G., Fracture Mechanics of Polymers, (1984)

[10]

Wong S.C., Mai Y.-W., Essential work of short fiber reinforced polymer composites, Polym. Eng. Sci., 39, pp. 356-364, (1999)

← 1 2 →