Surface Modification of Corundum Ceramics by Argon Ion Beam

被引：11

作者：

Ghyngazov S.A. ^{[1
]}

Kostenko V. ^{[1
]}

Ovchinnikov V.V. ^{[2
]}

Gushchina N.V. ^{[2
]}

Makhinko F.F. ^{[2
]}

机构：

[1] National Research Tomsk Polytechnic University, Tomsk

[2] Institute of Electrophysics, Ural Branch, Russian Academy of Sciences, Yekaterinburg

来源：

Inorganic Materials: Applied Research | 2019年 / 10卷 / 02期

基金：

俄罗斯科学基金会;

关键词：

aluminum oxide ceramic (corundum); ion beams; mechanical characteristics; X-ray phase analysis;

D O I：

10.1134/S2075113319020199

中图分类号：

学科分类号：

摘要：

Abstract: The mechanical properties of near-surface layers of aluminum oxide ceramic treated with a continuous ion beam of argon are investigated. The phase and structural changes of the modified near-surface layers were analyzed by X-ray diffraction analysis and scanning electron microscopy, respectively. Samples for research were made from corundum plates used in microelectronics. Ion processing was carried out using an ILM-1 ion implanter equipped with a Pulsar-1M ion source based on a low-pressure glow discharge with a cold hollow cathode. Argon ions with energy of 30 keV and ion current density j = 300 μA/cm2 were used for the irradiation. Two irradiation modes with the fluences of 1016 and 1017 cm–2 were implemented. It was established that the ion treatment promotes the manifestation of the initial grain structure of a sample and increases the mechanical characteristics (modulus of elasticity and nanohardness) of near-surface layers of samples. According to the X-ray diffraction data, after the action of an ion beam, there is a decrease in the size of the coherent scattering region with respect to the initial state. The irradiation leads to an increase in the values of crystal lattice microstrains. Possible mechanisms of modifying the ceramic surface are discussed. © 2019, Pleiades Publishing, Ltd.

引用

页码：438 / 444

页数：6

共 48 条

[1]

Grishunin V.A., Gromov V.E., Ivanov Y.F., Teresov A.D., Konovalov S.V., Evolution of the phase composition and defect substructure of rail steel subjected to high intensity electron-beam treatment, J. Surf. Invest., 5, pp. 990-995, (2013)

[2]

Surzhikov A.P., Frangulyan T.S., Ghyngazov S.A., Koval N.N., Structural-phase transformations in nearsurface layers of alumina-zirconium ceramics induced by low-energy high-current electron beams, Nucl. Instrum. Methods Phys. Res, Sect. B, 7, pp. 1072-1076, (2009)

[3]

Gromov V.E., Gorbunov S.V., Ivanov Y.F., Vorobiev S.V., Konovalov S.V., Formation of surface gradient structural-phase states under electron-beam treatment of stainless steel, J. Surf. Invest., 5, pp. 974-978, (2011)

[4]

Ivanov Y., Alsaraeva K., Gromov V., Konovalov S., Semina O., Evolution of Al-19.4Si alloy surface structure after electron beam treatment and high cycle fatigue, Mater. Sci. Technol., 13, pp. 1523-1529, (2015)

[5]

Sugar P., Frnc Iik M., Sugarova J., Sahul M., Laser beam milling of alumina ceramics—the impact on material removal efficiency and machined surface morphology, Solid State Phenom., 261, pp. 143-150, (2017)

[6]

Savruk E.V., Smirnov S.V., Analysis of the alumina ceramics structure after electron and laser treatment, Zavod. Lab., Diagn. Mater., 6, pp. 32-35, (2011)

[7]

Renk T.J., Provencio P.P., Prasad S.V., Shlapakovski S.S., Petrov A., Yatsui A., Kiyoshi J., Weihua S.H., Materials modification using intense ion beams, Proc. IEEE, 7, pp. 1057-1081, (2004)

[8]

Maslyaev S.A., Morozov E.V., Romakhin P.A., Pimenov V.N., Gribkov V.A., Tikhonov A.N., Bon-darenko G.G., Dubrovsky A.V., Kazilin E.E., Sasinovskaya I.P., Sinitsyna O.V., Damage of Al<sub>2</sub>O<sub>3</sub> ceramics under the action of pulsed ion and plasma fluxes and laser irradiation, Inorg. Mater.: Appl. Res., 7, pp. 330-339, (2016)

[9]

Ivanov L.I., Pimenov V.N., Gribkov V.A., Interaction of power pulsed fluxes of energy with materials, Fiz. Khim. Obrab. Mater., 1, pp. 23-37, (2008)

[10]

Schmidt B., Wetzig K., Ion Beams in Materials Processing and Analysis, (2013)

← 1 2 3 4 5 →