Improved surface properties of D2 steel by laser surface alloying

被引：0
作者：
Enori Gemelli
Alain Gallerie
Fernando C. T. Kopp
Nelson H. A. Camargo
机构：
[1] Center of Technological Sciences,Department of Mechanical Engineering
[2] UDESC—Santa Catarina State University,Ecole National Supérieure d'Electrochemie et d'Electrométallurgie de Grenoble
[3] Institut National Polytechnique de Grenoble,undefined
来源：
Journal of Materials Science | 2005年 / 40卷
关键词：
Microstructure; Carbide; Chromia; Cyclic Condition; Oxidation Resistance;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The wear and the high-temperature oxidation resistance of the D2 steel (Fe-1.5 C-12 Cr-0.95 Mo-0.9 V-0.3 Mn) were increased by laser surface alloying after coating the surface with SiC or Cr3C2 powder. The surface alloys exhibit two microstructures: hypoeutectic and hypereutectic, respectively, all containing iron solid solutions and iron-chromium carbides, (Fe,Cr)7C3. The oxidation resistance of these alloys was measured in isothermal and cyclic conditions, and was shown to increase with silicon or chromium additions, particularly due to the formation of a chromia scale with excellent behaviour during thermal shoks. The surface alloy obtained with Cr3C2 also has shown a better resistance to wear due to its hypereutectic microstructure.
引用
收藏
页码：5649 / 5653
页数：4
相关论文
共 50 条
[41]   Research of Microstructure and Property of Laser Alloying on the Surface of P20 Steel Compared with Nitriding [J].
Zhang Wei ;
Jiang Lizheng ;
Wang Ruiquan ;
Lin Bo .
HIGH PERFORMANCE STRUCTURES AND MATERIALS ENGINEERING, PTS 1 AND 2, 2011, 217-218 :1629-1632
[42]   Laser Surface Alloying of Low Carbon Steel Using High-entropy Alloy Precursors [J].
Liu, Xiao-tao ;
Lei, Wen-bin ;
Wang, Qun-jiao ;
Tong, Wei-ping ;
Liu, Chang-sheng ;
Cui, Jian-zhong .
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016, 23 (11) :1195-1199
[43]   Modification of the steel surface layer for its better wear resistance by means of laser melting and alloying [J].
Kusinski, J ;
Woldan, A ;
Kac, S .
LASER TECHNOLOGY VII: APPLICATIONS OF LASERS, 2003, 5229 :155-162
[44]   Laser surface alloying of Ti with Si, Al and Si plus Al for an improved oxidation resistance [J].
Majumdar, JD ;
Weisheit, A ;
Mordike, BL ;
Manna, I .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 266 (1-2) :123-134
[45]   Laser surface alloying of aluminium with WC plus Co plus NiCr for improved wear resistance [J].
Nath, Subhasisa ;
Pityana, Sisa ;
Majumdar, Jyotsna Dutta .
SURFACE & COATINGS TECHNOLOGY, 2012, 206 (15) :3333-3341
[46]   Surface engineered AlMn alloy using laser surface alloying for wear resistance [J].
Jiru, Moera Gutu ;
Singh, Balkeshwar .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (1-2) :275-281
[47]   Surface Analysis of AISI D2 Steel Treated by Plasma Nitriding and Niobium and Vanadium Nitride Films by Cathodic Cage Plasma Deposition [J].
de Deus, Gustavo Portela ;
Moncao, Renan Matos ;
de Almeida, Larissa Solano ;
Rossino, Luciana Sgarbi ;
de Carvalho Costa, Thercio Henrique ;
Liborio, Maxwell Santana ;
Feitor, Michelle Cequeira ;
Magalhaes de Sousa, Romulo Ribeiro .
BRAZILIAN JOURNAL OF PHYSICS, 2023, 53 (01)
[48]   The influence of laser alloying on the structure and mechanical properties of AlMg5Si2Mn surface layers [J].
Pakiela, W. ;
Tanski, T. ;
Brytan, Z. ;
Labisz, K. .
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2016, 122 (04)
[49]   Microstructure evolution and properties of in situ synthesized TiB2-reinforced aluminum alloy by laser surface alloying [J].
Zhang, Tingting ;
Li, Zhuguo ;
Feng, Kai ;
Kokawa, Hiroyuki ;
Wu, Yixiong .
JOURNAL OF MATERIALS RESEARCH, 2018, 33 (24) :4307-4316
[50]   Surface performance and physical properties of nanoscale ceramics reinforced laser alloying composite coatings [J].
Li, Jianquan ;
Liu, Huashi ;
Li, Guozhong .
COMPOSITES PART B-ENGINEERING, 2014, 57 :86-90
12345