Modeling and experimental validation of the surface residual stresses induced by hard machining of AISI H13 tool steel

被引：0
|
作者：
S. Caruso
J. C. Outeiro
D. Umbrello
R. M’Saoubi
机构：
[1] University of Calabria,Department of Mechanical Engineering
[2] Faculty of Engineering,CEMDRX, Department of Physics, FCTUC
[3] Portuguese Catholic University,undefined
[4] University of Coimbra,undefined
[5] Seco Tools AB,undefined
来源：
International Journal of Material Forming | 2010年 / 3卷
关键词：
Hard Machining; Material Behaviour; Finite Element Analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Residual stresses induced by orthogonal cutting of AISI H13 tool steel were modeled and simulated using Finite Element (FE) method. A two-dimensional model using elastic-plastic material behavior, shear friction model and a physical chip separation criterion for chip formation were developed. To validate this model the predicted surface residual stresses were compared with those experimentally obtained using X-ray diffraction technique. Finally, the proposed FE model was applied to investigate the influence of flank tool wear and cutting regime parameters on surface residual stresses distribution in the machined surface of AISI H13 tool steel.
引用
收藏
页码：515 / 518
页数：3
相关论文
共 50 条
  • [1] MODELING AND EXPERIMENTAL VALIDATION OF THE SURFACE RESIDUAL STRESSES INDUCED BY HARD MACHINING OF AISI H13 TOOL STEEL
    Caruso, S.
    Outeiro, J. C.
    Umbrello, D.
    M'Saoubi, R.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 515 - 518
  • [2] Modeling of the flow stress for AISI H13 tool steel during hard machining processes
    Umbrello, Domenico
    Rizzuti, Stefania
    Outeiro, Jose C.
    Shivpuri, Rajiv
    10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B, 2007, 907 : 775 - +
  • [3] Modelling of tool wear and residual stress during machining of AISI H13 tool steel
    Outeiro, Jose C.
    Umbrello, Domenico
    Pinat, Jose C.
    Rizzuti, Stefania
    NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 1155 - +
  • [4] FLOW STRESS MODEL FOR HARD MACHINING OF AISI H13 WORK TOOL STEEL
    R. Shivpuri
    Acta Metallurgica Sinica(English Letters), 2005, (06) : 741 - 748
  • [5] An experimental investigation of residual stresses in hard machining of AISI 52100 steel
    Caruso, S.
    Umbrello, D.
    Outeiro, J. C.
    Filice, L.
    Micari, F.
    1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
  • [6] Flow stress of AISI H13 die steel in hard machining
    Yan, Hong
    Hua, J.
    Shivpuri, R.
    MATERIALS & DESIGN, 2007, 28 (01) : 272 - 277
  • [7] Development of flow stress of AISI H13 die steel in hard machining
    Hong Yan
    Guohua Qian
    Qiang Hu
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2007, 22 : 187 - 190
  • [8] Development of flow stress of AISI H13 die steel in hard machining
    Yan, Hong
    Qian, Guohua
    Hu, Qiang
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2007, 22 (02): : 187 - 190
  • [9] Liquid nitrogen spraying in hard machining process of AISI H13 steel
    Jafarian, Farshid
    Mohseni, Emad
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024, 10 (02) : 393 - 407
  • [10] Laser surface hardening of AISI H13 tool steel
    Jae-Ho LEE
    Jeong-Hwan JANG
    Byeong-Don JOO
    Young-Myung SON
    Young-Hoon MOON
    Transactions of Nonferrous Metals Society of China, 2009, 19 (04) : 917 - 920
12345