Dendritic Growth in an Aluminum-Silicon Alloy

被引:0
作者
H. Kaya
E. Çadırlı
M. Gündüz
机构
[1] Niğde University,Department of Physics, Faculty of Arts and Sciences
[2] Erciyes University,Department of Physics, Faculty of Arts and Sciences
来源
Journal of Materials Engineering and Performance | 2007年 / 16卷
关键词
Al-Si alloy; directional solidification; dendritic growth; microstructures;
D O I
暂无
中图分类号
学科分类号
摘要
Unidirectional solidification experiments have been carried out on an Al-3 wt.% Si alloy as a function of temperature gradient, G and growth rate, V. The samples were solidified under steady-state conditions with a constant growth rate of 8.20 μm/s at different temperature gradients (1.97-6.84 K/mm) and with a constant temperature gradient (6.84 K/mm) at different growth rates (8.20-492.76 μm/s). Microstructure parameters (primary dendrite arm spacing, λ1, secondary dendrite arm spacing, λ2, dendrite tip radius, R and mushy zone depth, d) were measured as a function of temperature gradient and growth rate. The experimental results have been compared with the current theoretical models and similar experimental works.
引用
收藏
页码:12 / 21
页数:9
相关论文
共 50 条
[21]   Modeling of Dendritic Growth in Alloy Solidification with Melt Convection [J].
Hong, C. P. ;
Zhu, M. F. ;
Lee, S. Y. .
FDMP-FLUID DYNAMICS & MATERIALS PROCESSING, 2006, 2 (04) :247-260
[22]   Modeling of equiaxed and columnar dendritic growth of magnesium alloy [J].
Wu Meng-wu ;
Xiong Shou-mei .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (09) :2212-2219
[23]   An enthalpy method for modeling dendritic growth in a binary alloy [J].
Voller, V. R. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (3-4) :823-834
[24]   Development and research of technology for obtaining welding wire from aluminum-silicon alloys using rolling-extrusion [J].
Sidelnikov, Sergey Borisovich ;
Sokolov, Ruslan Evgenyevich ;
Belyaev, Sergey Vladimirovich ;
Dovzhenko, Nikolay Nikolaevich ;
Lopatina, Ekaterina Sergeevna ;
Konstantinov, Igor Lazarevich ;
Voroshilov, Denis Sergeevich ;
Gorbunov, Yuriy Alexandrovich ;
Mansurov, Yulbarskhon Nabievich ;
Galiev, Roman Ilsurovich ;
Ber, Vladimir Ivanovich .
INTERNATIONAL JOURNAL OF LIGHTWEIGHT MATERIALS AND MANUFACTURE, 2024, 7 (01) :87-96
[25]   Influence of graphite and copper in mechanical properties of aluminum silicon alloy [J].
Rajaram, G. ;
Kumaran, S. ;
Rao, T. Srinivasa .
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2011, 64 (1-2) :53-56
[26]   High temperature tensile and wear behaviour of aluminum silicon alloy [J].
Rajaram, G. ;
Kumaran, S. ;
Rao, T. Srinivasa .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 528 (01) :247-253
[27]   Influence of graphite and copper in mechanical properties of aluminum silicon alloy [J].
G. Rajaram ;
S. Kumaran ;
T. Srinivasa Rao .
Transactions of the Indian Institute of Metals, 2011, 64
[28]   NUMERICAL MODELING OF DENDRITIC GROWTH IN ALLOY SOLIDIFICATION WITH FORCED CONVECTION [J].
Sun, Dongke ;
Zhu, Mingfang ;
Pan, Shiyan ;
Raabe, Dierk .
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7) :1609-1614
[29]   The stability of dendritic growth in a binary alloy melt with buoyancy effect [J].
Chen, M. W. ;
Yang, C. M. ;
Zheng, G. J. ;
Wang, B. ;
Shi, Cailin ;
Qian, P. ;
Chen, X. H. ;
Wang, Z. D. .
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2021, 35 (19)
[30]   Modelling of dendritic growth in ternary alloy solidification with melt convection [J].
Sun, D. -K. ;
Zhu, M. -F. ;
Dai, T. ;
Cao, W. -S. ;
Chen, S. -L. ;
Raabe, D. ;
Hong, C. -P. .
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2011, 24 (3-4) :177-183