Semi-rigid Composite Beam-to-column Joints for Cold-formed Steel Frames: Experimental and Numerical Study

被引:0
|
作者
Faisal Amsyar
Cher Siang Tan
Arizu Sulaiman
Shahrin Mohammad
机构
[1] Universiti Teknologi Malaysia,School of Civil Engineering, Faculty of Engineering
[2] Universiti Teknologi Malaysia,Department of Structure and Materials, School of Civil Engineering, Faculty of Engineering
[3] Universiti Teknologi Malaysia,Chancellery Strategic Management Office
来源
International Journal of Steel Structures | 2023年 / 23卷
关键词
Semi-rigid joint; Cold-formed steel lipped-channel section; Composite joint; Moment resistance; Initial stiffness; Finite element analysis;
D O I
暂无
中图分类号
学科分类号
摘要
An experimental and numerical study was performed to evaluate the structural behaviour of the semi-rigid composite cold-formed steel beam-to-column joints, in terms of its strength and stiffness. Five composite joints were subjected to different diameters of rebar (8 mm and 10 mm) with varying types of reinforcing bar (high-strength rebar, mild-strength rebar and high-strength steel wire mesh) and different thicknesses of concrete slab (100 mm and 125 mm). Isolated joint tests were dispensed to all specimens by using 100 kN capacity of hydraulic jack to induce axial point load. Non-linear finite element models were developed by using ABAQUS software for the joint configurations. A 3-D stress option with an eight-node linear brick element and no hourglass controls (C3D8) was proposed to simulate all steel and concrete components as it provided well analysis prediction with further simulation beyond ultimate load-bearing capacity. Good correlation was observed from comparison of both experimental and numerical results with strength ratios that ranged from 0.92 to 0.98. Ultimate strength was obtained by increasing the diameter of steel reinforcement, thickness of concrete slab and using high-strength steel reinforcing bar instead of mild-steel reinforcing bar and high-strength steel wire mesh.
引用
收藏
页码:974 / 992
页数:18
相关论文
共 50 条
  • [41] Analysis of demountable steel and composite frames with semi-rigid bolted joints
    Wang, Jia
    Uy, Brian
    Li, Dongxu
    STEEL AND COMPOSITE STRUCTURES, 2018, 28 (03): : 363 - 380
  • [42] Experimental study and numerical investigation on hysteretic behavior of T-stub semi-rigid beam-to-column connections
    College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China
    Jianzhu Jiegou Xuebao, 7 (61-68):
  • [43] Analysis on prying force of semi-rigid beam-to-column connections in steel structure
    Wang, Y
    Li, JF
    PROGRESS IN SAFETY SCIENCE AND TECHNOLOGY, VOL III, PTS A AND B, 2002, 3 : 291 - 295
  • [44] Numerical study on welded beam-to-column joints in hybrid-steel building frames
    Cermelj, B.
    Beg, D.
    STESSA 2012: PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS, 2012, : 173 - 178
  • [45] Classification System for Semi-Rigid Beam-to-Column Connections
    Faridmehr, Iman
    Tahir, Mamood Md.
    Lahmer, Tom
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2016, 13 (11): : 2152 - 2175
  • [46] Effects of loading conditions on behaviour of semi-rigid beam-to-column composite connections
    Wong, YL
    Wang, JY
    Chan, SL
    ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2, 1999, : 451 - 458
  • [47] Numerical Simulation Analysis on Seismic Behavior of Cold-Formed Beam-to-Column Connections
    Chu, Yunpeng
    Yao, Yong
    ADVANCES IN STRUCTURES, PTS 1-5, 2011, 163-167 : 692 - 696
  • [48] Experimental study on seismic performances of a new type of fabricated semi-rigid beam-to-column connection
    Ding, Kewei
    Liu, Jianhua
    Ma, Wei
    Liu, Yunlin
    Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2021, 54 (04): : 1 - 7
  • [49] Experimental and numerical study of semi-rigid connection for long link-to-column joints
    Mohammadrezapour, Ebrahim
    Danesh, Fakhreddin
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 2020, 173 (07) : 488 - 500
  • [50] Experimental analysis of the cold-formed steel beam-to-column connection using the welded clip-angle
    Mallepogu, Nagaraju
    Madhavan, Mahendrakumar
    THIN-WALLED STRUCTURES, 2022, 179