A numerical simulation on multi-spot pressure tensioning process of circular saw blade

被引：0
作者：
Bo Li
Zhankuan Zhang
Weiguang Li
Xiaorui Peng
机构：
[1] Chinese Academy of Forestry,Research Institute of Wood Industry
来源：
Journal of Wood Science | 2015年 / 61卷
关键词：
Circular saw blade; Multi-spot pressure tensioning; Finite element method;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The multi-spot pressure tensioning process of circular saw blade was built by dynamic/explicit solution module of the finite element software called ABAQUS for avoiding non-convergence and improving the computational efficiency. The stress field of circular saw blade during loading process was calculated based on the finite element model. The model which could both meet the requirement of computational efficiency and accuracy was established by adjusting the step time and density of circular saw blade. The unloading process of circular saw blade was built by static/general solution module of ABAQUS using the stress field of loading process calculated by dynamic/explicit finite element method as initial conditions. The tangential tensioning stress field of circular saw blade tensioned by multi-spot pressure which showed the same trend with the measured result was calculated based on the two above-mentioned models. A more ideal distribution of tangential tensioning stress could be produced by the multi-spot pressure tensioning process. The feasibility of multi-spot pressure tensioning process was theoretically proved in this paper.
引用
收藏
页码：578 / 585
页数：7
相关论文
共 46 条
  • [1] Zhang ZK(2004)Testing methods of circular saw blade tension J Wood Process Mach 2 1-5
  • [2] Szymani R(1979)Theoretical and experimental analysis of circular saw tensioning Wood Sci Technol 13 211-237
  • [3] Mote CD(1989)Confirmation of φ splitting in the distribution of residual stress in tensioning circular saws Mokuzai Gakkaishi 35 856-858
  • [4] Umetsu J(1994)Measuring residual stresses in tensioned circular saws using X-rays (in Japanese) Mokuzai Gakkaishi 40 268-273
  • [5] Noguchi M(1974)A review of residual stresses and tensioning in circular saws Wood Sci Technol 8 148-161
  • [6] Wada K(1983)Analysis of roll tensioning and its influence on circular saw stability Wood Sci Technol 17 287-302
  • [7] Fujii Y(1984)Analysis of optimal roll tensioning for circular saw stability Wood Fiber Sci 16 323-338
  • [8] Umetsu J(2010)Analysis of dynamic characteristics of rotating circular saw subjected to thermal loading and tensioning J Therm Stress 33 501-517
  • [9] Noguchi M(2012)Genetic algorithm optimization for tensioning in a rotating circular saw under a thermal load J Therm Stress 35 1057-1075
  • [10] Matsumoto I(2004)Coordination of saw blade tensioning with rotation speed: myth or reality Holz Roh Werkst 62 313-315
12345