Effect of interface adhesion factor on the bearing capacity of strip footing placed on cohesive soil overlying rock mass

被引:0
作者
Shuvankar Das
Debarghya Chakraborty
机构
[1] Indian Institute of Technology Kharagpur,Department of Civil Engineering
来源
Frontiers of Structural and Civil Engineering | 2021年 / 15卷
关键词
bearing capacity; soil-rock interface; Hoek-Brown yield criterion; plasticity; limit analysis;
D O I
暂无
中图分类号
学科分类号
摘要
The problem related to bearing capacity of footing either on pure soil or on pure rock mass has been investigated over the years. Currently, no study deals with the bearing capacity of strip footing on a cohesive soil layer overlying rock mass. Therefore, by implementing the lower bound finite element limit analysis in conjunction with the second-order cone programming and the power cone programming, the ultimate bearing capacity of a strip footing located on a cohesive soil overlying rock mass is determined in this study. By considering the different values of interface adhesion factor (αcr) between the cohesive soil and rock mass, the ultimate bearing capacity of strip footing is expressed in terms of influence factor (If) for different values of cohesive soil layer cover ratio (Tcs/B). The failure of cohesive soil is modeled by using Mohr-Coulomb yield criterion, whereas Generalized Hoek-Brown yield criterion is utilized to model the rock mass at failure. The variations of If with different magnitudes of αcr are studied by considering the influence of the rock mass strength parameters of beneath rock mass layer. To examine stress distribution at different depths, failure patterns are also plotted.
引用
收藏
页码:1494 / 1503
页数:9
相关论文
共 62 条
[11]  
Rahaman O(2018)Effect of load eccentricity on the bearing capacity of strip footings on non-homogenous clay overlying bedrock Transportation Infrastructure Geotechnology 5 169-1577
[12]  
Florkiewicz A(1900)Circumstances that cause the elastic limit and the breakage of a material Journal of the German Engineers Association 46 1572-273
[13]  
Burd H J(2002)Hoek-Brown failure criterion—2002 edition Proceedings of NARMS-Tac 1 267-77
[14]  
Frydman S(2019)Effect of interface friction angle between soil and reinforcement on bearing capacity of strip footing placed on reinforced slope International Journal of Geomechanics 19 06019008-634
[15]  
Huang M(1988)Lower bound limit analysis using finite elements and linear programming International Journal for Numerical and Analytical Methods in Geomechanics 12 61-1549
[16]  
Qin H L(2006)Lower bound limit analysis of cohesive-frictional materials using second-order cone programming International Journal for Numerical Methods in Engineering 66 604-490
[17]  
Ouahab M Y(2007)Formulation and solution of some plasticity problems as conic programs International Journal of Solids and Structures 44 1533-1033
[18]  
Mabrouki A(2014)Lower-bound limit analysis of seismic passive earth pressure on rigid walls International Journal of Geomechanics 14 04014022-58
[19]  
Mellas M(2015)Adaptive selective ES-FEM limit analysis of cracked plane-strain structures Frontiers of Structural and Civil Engineering 9 478-192
[20]  
Benmeddour D(2018)Lower bound limit analysis of an anisotropic undrained strength criterion using second-order cone programming International Journal for Numerical and Analytical Methods in Geomechanics 42 1016-49