Effect of grain size on elastic modulus and hardness of nanocrystalline ZrO2-3 wt% Y2O3 ceramic

被引:1
|
作者
R. Chaim
M. Hefetz
机构
[1] Technion-Israel Institute of Technology,Department of Materials Engineering
[2] Rafael,undefined
来源
Journal of Materials Science | 2004年 / 39卷
关键词
Polymer; Grain Size; Porosity; Elastic Modulus; Y2O3;
D O I
暂无
中图分类号
学科分类号
摘要
Dense nanocrystalline ZrO2-3 wt% Y2O3 ceramics with grain sizes ranging between 23 to 130 nm were tested by ultrasonic pulse echo and Vickers hardness. The elastic modulus and hardness results were corrected for the residual porosity and the phase content. The corrected elastic moduli exhibited continuous decrease with decrease in the grain size. In contrast, no correlation was found between the corrected hardness and grain size. The percolative composite model was used to describe the changes in the elastic moduli in terms of percolation of the elastic wave through the intercrystalline phase at the percolation threshold. The absence of correlation with the hardness results was explained due to the other energy absorbing mechanisms such as microcracking beneath the indenter.
引用
收藏
页码:3057 / 3061
页数:4
相关论文
共 50 条
  • [1] Effect of grain size on elastic modulus and hardness of nanocrystalline ZrO2-3 wt% Y2O3 ceramic
    Chaim, R
    Hefetz, M
    JOURNAL OF MATERIALS SCIENCE, 2004, 39 (09) : 3057 - 3061
  • [2] Fabrication of dense nanocrystalline ZrO2-3 wt. % Y2O3 by hot-isostatic pressing
    Chaim, R
    Hefetz, M
    JOURNAL OF MATERIALS RESEARCH, 1998, 13 (07) : 1875 - 1880
  • [3] Rapid rate sintering of nanocrystalline ZrO2-3 mol% Y2O3
    Pennsylvania State Univ, University Park, United States
    J Am Ceram Soc, 4 (906-912):
  • [4] Fabrication of dense nanocrystalline ZrO2-3 wt. % Y2O3 by hot-isostatic pressing
    Technion-Israel Inst of Technology, Haifa, Israel
    J Mater Res, 7 (1875-1880):
  • [5] Synthesis and sintering behavior of nanocrystalline ZrO2-3 mol% Y2O3 powders
    Srdic, Vladimir V.
    Radonjic, Ljiljana
    Key Engineering Materials, 1997, 132-136 (Pt 1): : 45 - 48
  • [6] Effect of the characteristics of the powders on the microstructure and mechanical properties of sintered ceramic ZrO2-3% (mol) Y2O3
    Kabanova, MI
    Dubok, VA
    POWDER METALLURGY AND METAL CERAMICS, 1996, 35 (1-2) : 92 - 97
  • [7] Electric response of ZrO2-3 mol% Y2O3 nanocrystals
    Cachadiña, I
    Solier, JD
    Sánchez-Bajo, F
    Domínguez-Rodríguez, YA
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 1999, 38 (06): : 611 - 614
  • [8] The ceramic ZrO2-3 mol.% Y2O3 formed by sintering and its behavior at fracture
    Konstantinova, TE
    Danilenko, IA
    Gorokh, AV
    Volkova, GK
    REFRACTORIES AND INDUSTRIAL CERAMICS, 2001, 42 (3-4) : 102 - 105
  • [9] Mechanical properties of ceramics prepared from a nanocrystalline ZrO2-3 mol.% Y2O3 powder
    Akimov, GY
    Timchenko, VM
    REFRACTORIES AND INDUSTRIAL CERAMICS, 2004, 45 (01) : 55 - 57
  • [10] APPLICATION OF METHOD ELECTROCONSOLIDATION FOR PRODUCTION CERAMICS ON BASED ZrO2-3 %Y2O3
    Lobach, K. V.
    Sayenko, S. Yu
    Svitlychniy, Y. O.
    Surkov, O. Y.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2011, (06): : 99 - 102