Self-optimizing injection molding based on iterative learning cavity pressure control

被引：25

作者：

Hopmann C. ^{[1
]}

Abel D. ^{[2
]}

Heinisch J. ^{[1
]}

Stemmler S. ^{[2
]}

机构：

[1] Institute of Plastics Processing (IKV), RWTH Aachen University, Seffenter Weg 201, Aachen

[2] Institute of Automatic Control (IRT), RWTH Aachen University, Steinbachstraße 54, Aachen

来源：

Production Engineering | 2017年 / 11卷 / 02期

关键词：

Cavity pressure control; Injection molding; Iterative learning control; Model-based self-optimization;

D O I：

10.1007/s11740-017-0719-6

中图分类号：

学科分类号：

摘要：

Modern injection molding machines can reproduce machine values, such as the position and speed of the plasticizing screw, with a high precision. To achieve a further improvement of the part quality, adaption and self-optimization strategies are required, which is realized by the implementation of a model-based self-optimization to an injection molding machine. Within this concept, a pvT-optimization allows an online control of the holding pressure that is tailored to the plastics material, considering the relationship between pressure, specific volume and temperature. A control strategy is required that controls the cavity pressure with respect to the reference generated by the pvT-optimization. However, cavity pressure control, in contrast to pressure control in the plasticizing unit, is hitherto not possible without a time-consuming system parametrization. Due to the repetitive character of the injection molding process, the iterative learning control (ILC) is a suitable approach. The ILC uses information gained within the previous cycle and a model to generate the optimal controller outputs for the following cycle. Based on this iterative learning, the reference tracking of the cavity pressure can be improved over several cycles. Additionally, repetitive disturbances can be compensated automatically. To improve the convergence speed of the ILC, a process model can be used explicitly. Based on this premise, an ILC for cavity pressure control is developed and researched in injection molding experiments. It is shown that the flexibility of the control strategy can be improved without compromising performance. © 2017, German Academic Society for Production Engineering (WGP).

引用

页码：97 / 106

页数：9

共 37 条

[1]

Menges G., Stitz S., Vargel J., Grundlagen der Prozeßsteuerung beim Spritzgießen, Kunststoffe, 61, 2, pp. 74-80, (1971)

[2]

Gao F., Yang Y., Multi-variable interaction analysis and a proposed quality control system for thermoplastics injection molding, Society of Plastics Engineers, ANTEC, 1997, (1997)

[3]

Schreiber A., Regelung des Spritzgießprozesses auf Basis von Prozessgrößen und im Werkzeug ermittelter Materialdaten, (2011)

[4]

Sarholz R., Spritzgießen: Verfahrensablauf, Verfahrensparameter, Prozeßführung, (1979)

[5]

Gordon G., Kazmer D.O., Tang X., Fan Z., Gao R.X., Quality control using a multivariate injection molding sensor, Int J Adv Manuf Technol, 78, 9, pp. 1381-1391, (2015)

[6]

Hengesbach J.A., Verbesserung der Prozeßführung beim Spritzgießen durch Prozeßüberwachung, (1976)

[7]

Kruppa S., Adaptive Prozessführung und alternative Einspritzkonzepte beim Spritzgießen von Thermoplasten, (2015)

[8]

Heinzler F., Modellgestützte Qualitätsregelung durch eine adaptive, Druckgeregelte Prozessführung beim Spritzgießen, (2014)

[9]

Brecher C., Karmann O., Kozielski S., Integrative Produktionstechnik für Hochlohnländer, (2011)

[10]

Stitz S., Analyse der Formteilbildung beim Spritzgießen von Plastomeren als Grundlage für die Prozeßsteuerung, (1973)

← 1 2 3 4 →