Characteristics of triangle in triangulated cylindrical origami with axial load test for space deployable structures

被引:0
作者
Divlan Audie Sentanu
Muhammad Akhsin Muflikhun
机构
[1] Gadjah Mada University,Mechanical and Industrial Engineering Department
来源
Journal of Mechanical Science and Technology | 2023年 / 37卷
关键词
Deployable structure; Loading mode; Metamaterial; Origami; Triangulated cylinder;
D O I
暂无
中图分类号
学科分类号
摘要
Triangulated cylindrical origami (TCO) has multiple parameters that can control and predict the transformation process. In the present study, the Kresling pattern was constructed by congruent triangles in helical formation. It is shown that triangle angles have a huge impact on load-bearing ability. Experimental tests and mathematical calculation of Kresling-patterned triangulated cylinder in different α angles with one constant angle for all specimens were developed. This study aims to understand the relevancy and distinction of experimental and mathematical approaches with axial load in the process of creating single unit Kresling pattern origami. The specimens were tested with the axial test without applying twist movement on it. The structures could hold up to 176 N for the most significant angle observed. The reversible deformation of TCO from deployed to folded state with axial load was performable with α angle below 50° with 136 N of load. Based on the experiment, the larger the α angle, the more dependent on the twist. The axial load test without twist movement shows similar energy distribution during deformation process. Further observations related to overall strength of TCO due to difference in the value of mathematical and experimental results are required. The present research could give a contribution related to the design method for the fabrication of Kresling pattern origami.
引用
收藏
页码:5957 / 5964
页数:7
相关论文
共 102 条
  • [1] Suh J E(2021)New approach to folding a thin-walled yoshimura patterned cylinder J. Spacecr. Rockets 58 516-530
  • [2] Kim T H(2021)Deployable structures: structural design and static/dynamic analysis J. Elast. 146 199-235
  • [3] Han J H(2022)Multiscale modeling of viscoelastic behavior of unidirectional composite laminates and deployable structures Mater. Des. 219 110754-214
  • [4] Zhang X(2022)Kirigami-inspired thick-panel deployable structures Int. J. Solids Struct. 251 111752-18
  • [5] Nie R(2022)A programmable origami-inspired space deployable structure with curved surfaces Eng. Struct. 256 113934-343
  • [6] Chen Y(2023)Shape memory polymer composite circular and square hollow members for deployable structures Compos. Part A Appl. Sci. Manuf. 171 107559-96
  • [7] He B(2022)Space deployable bistable composite structures with C-cross section based on machine learning and multi-objective optimization Compos. Struct. 297 115983-6
  • [8] An N(2022)Inverse design of deployable origami structures that approximate a general surface Int. J. Solids Struct. 234–235 111224-10
  • [9] Jia Q(2019)A tunable nonlinear vibrational energy harvesting system with scissor-like structure Mech. Syst. Signal Process 125 202-13
  • [10] Jin H(2020)The evaluation of failure mode behavior of CFRP/Adhesive/SPCC hybrid thin laminates under axial and flexural loading for structural applications Composites Part B 185 107747-213