Oxidation behavior of copper nitride thin films deposited by direct current magnetron sputtering

被引:0
|
作者
Perumal Devaraj
Pazhanisami Peranantham
Yekkoni Lakshmanan Jeyachandran
机构
[1] Bharathiar University,Department of Physics
关键词
D O I
暂无
中图分类号
学科分类号
摘要
The oxidation characteristics of copper nitride (CuxN) thin films deposited by dc magnetron sputtering in optimized sputtering conditions at room temperature and different substrate temperatures and those annealed at various temperatures under vacuum, nitrogen, oxygen and air atmospheres, and on exposure to laser radiation were investigated. Optical transmittance spectroscopy, sheet resistance measurements performed in in-vacuo and ex-vacuo conditions, Raman spectroscopy, and x-ray diffraction measurements were used to monitor the oxidation and also the decomposition characteristics of the films. The films exhibited high susceptibility to oxidation in the presence of oxygen even in residual level, large humidity effect on oxidation, and ambient dependent decomposition behavior. The oxidation pattern of the films was found to be defined by their initial composition. The oxidation of CuxN composition starts from Cu2O phase and progresses to CuO phase, whereas the Cu-rich composition stabilizes in Cu2O phase. The present study establishes the ambient and substrate / annealing temperature-dependent oxidation and decomposition behavior of the CuxN films and demonstrates the possibility of controlling their extent by adjusting these deposition and post-deposition parameters. These findings are important for fundamental understanding and relevant for resistive switching, optical storage, and photo-catalysis applications of the CuxN films.
引用
收藏
页码:27899 / 27912
页数:13
相关论文
共 50 条
  • [41] Microstresses in molybdenum nitride thin films deposited by reactive DC magnetron sputtering
    Shen, YG
    RESIDUAL STRESSES VII, PROCEEDINGS, 2005, 490-491 : 589 - 594
  • [42] Adhesion analysis for chromium nitride thin films deposited by reactive magnetron sputtering
    Rusu, F. M.
    Merie, V. V.
    Pintea, I. M.
    Molea, A.
    7TH INTERNATIONAL CONFERENCE ON ADVANCED CONCEPTS IN MECHANICAL ENGINEERING, 2016, 147
  • [43] Polycrystalline NbRe superconducting films deposited by direct current magnetron sputtering
    Cirillo, C.
    Caputo, M.
    Divitini, G.
    Robinson, J. W. A.
    Attanasio, C.
    THIN SOLID FILMS, 2022, 758
  • [44] Properties of titanium nitride films prepared by direct current magnetron sputtering
    Jeyachandran, Y. L.
    Narayandass, Sa. K.
    Mangalaraj, D.
    Areva, Sami
    Mieluarski, J. A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 : 223 - 236
  • [45] STRUCTURE AND PROPERTIES OF TITANIUM NITRIDE THIN-FILMS DEPOSITED AT LOW-TEMPERATURES USING DIRECT-CURRENT MAGNETRON SPUTTERING
    ELSTNER, F
    EHRLICH, A
    GIEGENGACK, H
    KUPFER, H
    RICHTER, F
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1994, 12 (02): : 476 - 483
  • [46] Direct current magnetron sputtering deposition of InN thin films
    Cai, Xing-Min
    Hao, Yan-Qing
    Zhang, Dong-Ping
    Fan, Ping
    APPLIED SURFACE SCIENCE, 2009, 256 (01) : 43 - 45
  • [47] Microstructure and Oxidation Behavior of Metal V Films Deposited by Magnetron Sputtering
    Zhang, Song
    Wang, Tingting
    Zhang, Ziyu
    Li, Jun
    Tu, Rong
    Shen, Qiang
    Wang, Chuanbin
    Luo, Guoqiang
    Zhang, Lianmeng
    MATERIALS, 2019, 12 (03)
  • [48] Properties of carbon nitride films deposited by magnetron sputtering
    Kusano, Y
    Evetts, JE
    Somekh, RE
    Hutchings, IM
    THIN SOLID FILMS, 1998, 332 (1-2) : 56 - 61
  • [49] Structural and ferroelectric properties of bismuth ferrite thin films deposited by direct current reactive magnetron sputtering
    Iljinas, Aleksandras
    Stankus, Vytautas
    THIN SOLID FILMS, 2016, 601 : 106 - 110
  • [50] The thermoelectric properties of In2O3 thin films deposited by direct current magnetron sputtering
    Ye, Fan
    Su, Xiao-Qiang
    Cai, Xing-Min
    Wang, Huan
    Zheng, Zhuang-Hao
    Liang, Guang-Xing
    Fan, Ping
    Zhang, Dong-Ping
    Luo, Jing-Ting
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MATERIAL, MECHANICAL AND MANUFACTURING ENGINEERING, 2015, 27 : 1917 - 1922