Response Surface Methodology based Desirability Approach for Optimization of Roller Burnishing Process Parameter

被引：22
作者：
Patel K.A. [1 ]
Brahmbhatt P.K. [2 ]
机构：
[1] Paher University, Udaipur, 313003, Rajasthan
[2] Government Engineering College, Dahod, 389151, Gujarat
来源：
Journal of The Institution of Engineers (India): Series C | 2018年 / 99卷 / 6期
关键词：
Burnishing process; Central composite design; Desirability function; Optimization technique; Response surface methodology;
D O I：
10.1007/s40032-017-0368-8
中图分类号：
学科分类号：
摘要：
In the present study, an optimization of roller burnishing process in CNC machining centre has been discussed using response surface methodology (RSM) collectively with desirability function approach (DFA). Response surface methodology is a statistical technique used to model and optimize the response. Using a rotatable central composite design (CCD) of RSM, model was developed to predict surface roughness. Burnishing speed, Interference, Feed and No of tool pass were considered as model variables to develop the predictive models. Experiments were conducted on Aluminium alloy 6061 work material based on five-level design with spindle speed, interference, feed, and number of tool pass as model variables to develop the predictive models. The results indicated that Interference and feed were the most significant factors on the surface roughness. The validity of the predicted model has been confirmed by performing verification experiments under the optimal conditions. Results of the experimentation at the optimum process parameter combination confirm the effectiveness of the developed model using response surface method for optimum burnishing parameters. © 2017, The Institution of Engineers (India).
引用
收藏
页码：729 / 736
页数：7
相关论文
共 21 条
  • [1] Lin Y.C., Yan B.H., Huang F.Y., Surface improvement using a combination of electrical discharge machining with ball burnish machining based on the Taguchi method, Int. J. Adv. Manuf. Technol., 18, 9, pp. 673-682, (2001)
  • [2] Lin Y.C., Wang S.W., Lai H.-Y., The relationship between surface roughness and burnishing factor in the burnishing process, Int. J. Adv. Manuf. Technol., 23, 9-10, pp. 666-671, (2004)
  • [3] Luo H., Et al., Investigation of the burnishing process with PCD tool on non-ferrous metals, Int. J. Adv. Manuf. Technol., 25, 5-6, pp. 454-459, (2005)
  • [4] El-Taweel T.A., El-Axir M.H., Analysis and optimization of the ball burnishing process through the Taguchi technique, Int. J. Adv. Manuf. Technol., 41, 3-4, pp. 301-310, (2009)
  • [5] Chen C.H., Shiou F.-J., Determination of optimal ball-burnishing parameters for plastic injection moulding steel, Int. J. Adv. Manuf. Technol., 21, 3, pp. 177-185, (2003)
  • [6] Pu Z., Et al., Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy, Corros. Sci., 57, pp. 192-201, (2012)
  • [7] Nemat M., Lyons A.C., An investigation of the surface topography of ball burnished mild steel and aluminium, Int. J. Adv. Manuf. Technol., 16, 7, pp. 469-473, (2000)
  • [8] Basak H., Goktas H.H., Burnishing process on al-alloy and optimization of surface roughness and surface hardness by fuzzy logic, Mater. Des., 30, 4, pp. 1275-1281, (2009)
  • [9] Patel K.A., Brahmbhatt P.K., A comparative study of the RSM and ANN models for predicting surface roughness in roller burnishing, Procedia Technol, 23, pp. 391-397, (2016)
  • [10] Li J., Et al., Medium optimization by combination of response surface methodology and desirability function: an application in glutamine production, Appl. Microbiol. Biotechnol., 74, 3, pp. 563-571, (2007)
123