Characteristic Parameters for Dendritic Microstructure of Solidification During Slab Continuous Casting

被引：0
作者：
Wei Guo
Miao-yong Zhu
机构：
[1] Northeastern University,School of Materials and Metallurgy
来源：
Journal of Iron and Steel Research International | 2009年 / 16卷
关键词：
slab continuous casting; dendritic solidification; microstructure; dendritic arm spacing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The operating conditions during the continuous casting process have a great effect on the microstructure of slab solidification, including primary and secondary dendritic arm spacing. On the basis of the analysis of available work, a revised expression for describing secondary dendritic arm spacing during solidification of slab continuous casting was presented, and the relation between the ratio of primary dendritic arm spacing to secondary dendritic arm spacing and the cooling rate was obtained.
引用
收藏
页码：17 / 21
页数：4
相关论文
共 37 条
  • [1] Alkemper J(2001)Three-Dimensional Characterization of Dendritic Microstructures [J] Acta Mater 49 897-undefined
  • [2] Voorhees P W(2004)Progress on Research Work to Important Characteristic Parameters of Dendrite Microstructure Formed During Solidification Process of Concasting Billet [J] Special Steel 25 1-undefined
  • [3] Feng K(2000)The Effect of Cooling Rate on the Microstructures Formed During Solidification of Ferritic Steel [J] Metall Mater Trans 31A 3155-undefined
  • [4] Chen D-f(1987)A Model for the Numerical Computation of Microsegregation in Alloys [J] Applied Scientific Research 44 43-undefined
  • [5] Xu C-s(1987)Development of a Computer Model of Dendritic Microsegregation for Use With Multicomponent Steels [J] Applied Scientific Research 44 51-undefined
  • [6] Pryds N H(1981)Dendrite Growth at the Limit of Stability: Tip Radius and Spacing [J] Acta Metall 29 11-undefined
  • [7] Huang X(1997)Estimation of Primary Dendritic Arm Spacings in Continuous Casting Products [J] Scripta Mater 37 599-undefined
  • [8] Ogilvy A J(1998)Macro-Micro Modeling of the Dendritic Microstructure of Steel Billets Processed by Continuous Casting [J] ISIJ Int 38 812-undefined
  • [9] Kirwood D H(1998)Numerical Modeling of Casting Process [J] Advanced Performance Materials 5 65-undefined
  • [10] Howe A A(1998)Effect of Cooling Rate on ZAT, LIT and ZDT of Carbon Steels Near Melting Point [J] ISIJ Int 38 1093-undefined
1234